DIY Cooling

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Purchase different thickness copper thermal pad you purpose one-step,default combination: 1 piece - 0.1mm 1 piece - 0.3mm 1 piece - 0.4mm 2 pieces - 0.5mm 1 piece - 0.6mm 2 pieces - 0.8mm 1 piece - 1.0mm 1 piece - 1.2mm
• Dimensions: 15x15mm
• Model #: CU-PAD-KIT

Limited time offer, ends 08/31

• Model #: 11-001-360

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
• Model #: 11-001-395

Limited time offer, ends 08/31

• Color: Gold
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, Router, Computer Component etc Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 22x22x10mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem. Specification Product Name: Heatsink Material: Aluminium Color: Gold Plated Overall Size: 22 x 22x 10mm/ 0.87" x 0.87" x 0.4" (L*W*H) Weight: 35g Package Content: 5pcs x Heatsink
• Dimensions: 22 x 22x 10mm/ 0.87" x 0.87" x 0.4" (L*W*H)
• Model #: 11-001-325

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 20mm x 20mm x 6mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 10 x Heatsink
• Dim...
• Model #: 11-001-060

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H) Weight: 30g Package Content: 5pcs x Heatsink
• Dimensions: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
• Model #: 11-001-328

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 1.5mm
• Dimensions: 15mm x 15mm x 1.5mm
• Model #: 11-001-269

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
• Dimensions: 100mm x 150mm x 2.0mm
• Model #: 11-001-025

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.3mm
• Dimensions: 15mm x 15mm x 0.3mm
• Model #: 11-001-266

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and gre...
• Model #: 11-001-098

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.6mm
• Dimensions: 15mm x 15mm x 0.5mm
• Model #: 11-001-268

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: 10 pcs of 11x11x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface. The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface Excellent adhesive performance with good wetting and flow onto many substrate surfaces. T...
• Model #: 11-001-394

Limited time offer, ends 08/31

• Model #: 11-001-356

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 8.8mm x 8.8mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Heat-conductive adhesive tape is included Weight: 35g Package Content: 50 x Heatsink...
• Model #: 11-001-046

Limited time offer, ends 08/31

• Model #: 11-001-362-5CM

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. Size is 11mm x 11mm x 5mm,Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 11mm x 11mm x 5mm 3M 9448A Heat-conductive adhesive tape is included Package Content: 20 x Heatsink
• Di...
• Model #: 11-001-049

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,etc. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 20mm x 20mm x 6mm Weight: 25g Package Content: 5pcs x Heatsink
• Dimensions: 20mm x 20mm x 6mm
• Model #: 11-001-259

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset Quantity: a lot of 20 Pieces M3 Screw Hole. Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H) Thickness" 0.8mm Color : Anodized Black Weight: 2g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 19x 15x 10mm
• Model #: 11-001-067

Limited time offer, ends 08/31

• Model #: 11-001-194

Limited time offer, ends 08/31

• Model #: 11-001-362-4CM

Limited time offer, ends 08/31

• Color: Gold ,Silver
• Compatibility: Motherboard Chipsets
• Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer. Computer PC motherboard Cooling Heatsink Kit is a fan-less cooling solution to any motherbard. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name :PC Comupter Motherboard Heatsink; Material : Aluminium Package Content : 3 pieces - 22mmx22mmx10mm Heatsink 3 pieces - 10mmx35mmx10mm Heatsink 15 pieces - 20mmx14mmx6mm Heatsink 15 pieces - 14mmx14mmx6mm Heatsink 30 pieces - 8.8mmx8.8mmx5mm Heatsink...
• Model #: 11-001-129

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247 Rectifier, Transistor or Regulator IC. Quantity: a lot of 10 Pieces. M3 Screw Hole. Size: 25 x 15x 10mm / 0.98" x 0.6" x 0.4"(L*W*H) Color : Silver Tone Weight: 4g/ piece Please check the specification table and make sure that the size of the heatsink fits that of your component
• Dimensions: 25 x 15x 10mm
• Model #: 11-001-065

Limited time offer, ends 08/31

• Model #: 11-001-289

Limited time offer, ends 08/31

• Compatibility: Motherboard Chipsets
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
• Dimensions: 100mm x 100mm x2.0mm
• Model #: 11-001-015

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: 8pcs/lot Cooper Cooling Heatsinks cooler Set Heat Sink Size 22X8X5mm,Solid copper construction, easy to install. These Premium Copper Heatsinks are a perfect solution for cooling your Computer Motherboard,GPU VGA Video Graphics Card, DDR DDR2 DDR3 RAM Menory and ANA/Southbridge chips. Developed from pure copper, cools better than aluminum. (Increase thermal conductivity)Dissipates RAM heat to improve its performance.Reduces the temperature of the memory.Compatible with all standard SD/DDR SDRAM. High conductivity thermal adhesive tape backing,Can be removed and re-applied. Material : Copper Thermal conductivity: 401w / mk 8pcs Thermal Conductive Copper 22mm x 8mm x 5mm Application: Cooling for electronic products, such as: Video card, Graphic card,VGA,GPU Motherboard,systemboard DDR DDR2,DDR3 RAM Menory Northbridege, Southbridge...
• Model #: 11-001-236

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc. Use heatsink adhesive glue to install heatsink .(Glue is not included) Please check the specification table and make sure the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 8.8mm x 8.8mm x 5mm Weight: 35g Package Content: 50 x Heatsink
• Dimensions: 8.8mm x 8.8mm x 5mm
• Model #: 11-001-256

Limited time offer, ends 08/31

• Model #: 11-001-293

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H) Weight: 5...
• Model #: 11-001-329

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips. It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc. Package included: 10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.2mm
• Dimensions: 20mm x 20mm x 1.2mm
• Model #: 11-001-273

• Series: N/A
• Color: Black
• Model #: JEYI M.2 Cooler-Blac

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for Router,Memory,IC ,LED,fan cooling and Various mini DC converter circuit board. Use heatsink adhesive glue to install heatsink .(Glue is not included) Size is 50mm x 28mm x 8mm,Please check the specification carefully and make sure that the size of the heatsink fits your component. Specification Product Name: Heatsink Material: Aluminium Color: Silver Tone Overall Size: 50 x 28 x 8mm/ 2.0" x 1.1" x 0.31" (L*W*H) Weight: 22g/ea. Package Content: 2pcs x Heatsink
• Dimensions: 50*25*8mm
• Model #: 11-001-062

Limited time offer, ends 08/31

• Compatibility: CPU
• Features: 8pcs/lot Cooper Cooling Heatsinks cooler Set Heat Sink Size 14x12x5.5mm,Solid copper construction, easy to install. These Premium Copper Heatsinks are a perfect solution for cooling your Computer Motherboard,GPU VGA Video Graphics Card, DDR DDR2 DDR3 RAM Menory and ANA/Southbridge chips. Developed from pure copper, cools better than aluminum. (Increase thermal conductivity)Dissipates RAM heat to improve its performance.Reduces the temperature of the memory.Compatible with all standard SD/DDR SDRAM. High conductivity thermal adhesive tape backing,Can be removed and re-applied. Material : Copper Thermal conductivity: 401w / mk 8pcs Thermal Conductive Copper 14mmx12mmx5.5mm Application: Cooling for electronic products, such as: Video card, Graphic card,VGA,GPU Motherboard,systemboard DDR DDR2,DDR3 RAM Menory Northbridege, Southbrid...
• Model #: 11-001-235

Limited time offer, ends 08/31

• Color: Black
• Compatibility: Motherboard Chipsets
• Features: Anodized Black Aluminum heatsink for Computer General northbridge ,Southbridge Cooling ,also can be used for cooling graphics card, vidoe card,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc. The fins increase the area of the board and thus provide for greater heat transfer. Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here. Size is 28mm x 28mm x 20mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name: Heatsink Material: Aluminium Color: Anodized Black Overall Size: 28 x 28 x 20mm/ 1.1" x 1.1" x 0.8" (L*W*H) Weight: 30g Package Content: 2pcs x Heatsink
• Dimensions: 28 x 28 x 20mm
• Model #: 11-001-327

Limited time offer, ends 08/31

• Color: Silver
• Compatibility: Motherboard Chipsets
• Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component. Specification Product Name : Heatsink; Material : Aluminium Color : Silver Tone Overall Size : 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H) Weight : 410g Package Content : 1 x Heatsink
• Dimensions: 160 x 80x 26.9mm/ 6.3" x 3.15" x 1.09" (L*W*H)
• Model #: 11-001-331

Limited time offer, ends 08/31

• Brand: EN-Lab
• Type: Fan power cable
• Type: PWM 4pin fan hub splitter
• Color: Black
• Model #: PWMHUB10S

Limited time offer, ends 08/31

• Model #: 11-001-359