Model: LE8202
| Internal Interface | PCI-Express 1.0 X1 |
|---|---|
| External Interface | 2 x 10/100/1000Mbps Ethernet Interface |
| Chip | 2 x RTL8111H |
| LED Indicator | Yellow for 100Mbps signal, Green for 1000Mbps |
| OS Compatibility | Plug & Play in Windows/Linux/Mac OS (Note: You may need to install the driver if your OS can not find the network card) |
| VM Compatibility | VMWare ESXi 5.x and 6.x/Proxmox/unRaid. (Note: you need to install the driver for VMware ESXi 7.0 or above) |
Dual Ports PCI Express 10/100/1000M Ethernet on Motherboard, Notebook, or Embedded systems
- Auto-Negotiation with Next Page capability
- Supports pair swap/polarity/skew correction
- Crossover Detection & Auto-Correction
- Transmit/Receive on-chip buffer support
- Supports power down/link down power saving/PHY disable mode
- XTAL-Less Wake-On-LAN
- LAN disable with GPIO pin
- Supports LTR (Latency Tolerance Reporting)
- Microsoft NDIS5, NDIS6 Checksum Offload (IPv4, IPv6, TCP, UDP) and Segmentation Task-offload (Large send v1 and Large send v2) support
- Supports jumbo frame to 9K bytes
- Supports quad core Receive-Side Scaling (RSS)
- Supports Protocol Offload (ARP & NS)
PCI-Express 1.0 X1 Speed
- PCI-Express 1.0 X1 bus bandwidth offer 2Gbps speed at max
- RTL8111H converts PCI-Express 1.0 X1 to the Ethernet signal at full speed (10/100/1000Mbps)
Package Including
- Dual port 10/100/1000Mbps PCI-E NIC Network Card
- 12cm Regular-profile bracket and 8cm Low-profile bracket
| Products | ||||||
|---|---|---|---|---|---|---|
| Internal Interface | PCI-Express 1.0 X1 | PCI-Express 1.0 X1 | PCI-Express 2.0 X1 | PCI-Express 2.0 X1 | PCI-Express 2.0 X2 | PCI-Express 2.0 X4 |
| External Interface | 100/1000Mbps Ethernet | 2 x 100/1000Mbps Ethernet | 4 x 100/1000Mbps Ethernet | 2.5Gbps | 2 x 100/1000Mbps + 2 x 2.5Gbps | 4 x 2.5Gbps |
