PBD Outdoor Amplified Digital HDTV Antenna - 150 Miles Range - 360° Rotation
This outdoor HDTV antenna is designed to receive digital TV UHF/VHF signals while providing high quality HDTV picture. You can enjoy high definition television without the high cost of cable or satellite. With a built-in rotor, Turn a full 360 degrees using the infrared remote control.
Specifications:
Working Frequency: VHF 170~230MHz | UHF 470~890MHz
Noise Figure:< =2.5dB
Typical Antenna Gain: VHF 28~32dB | UHF 32~36dB
Impedance: 75Ohm
Max Output Level:105dB u V
Main Voltage: AC120V±10%/60Hz
Operation Temperature: -10° C ~ 50° C
Coaxial Cable Length: 40FT RG6
Package Contents
1 - HDTV Yagi antenna built-in amplifier,
1 - Motor-fixed bolster with 40FT long RG6 Coaxial cable
1 - UL adapter, Control box, and Remote Control (AAA batteries NOT included)
1 - J-shape mounting Pole
Need an antenna that comes with all mounting accessories? Don't worry about searching for a suitable mounting pole, because one is already included in the box.
A Leader In Cutting-Edge Technology
Why do our antennas outperform the competition? The proof is in the patented SNAP-ON design. The 2608 series is engineered to respond to a greater range of frequencies along with a wide beam angle eliminating the need for rotation.
This outdoor HDTV antenna is designed as a perfect substitute for your annual cable to receive digital TV UHF/VHF signals. You can now enjoy free 4K high definition television without the high cost of cable or satellite. We also built it with motorized ability, you can adjust the antenna up to 360° now, simply by using the infrared remote control.
WARM TIPS
The antenna would work best with original accessories.
DO NOT use a switch or splitter between the Antenna and the control box. Splitter can be used after control box only!
Please connect the given cable to the control box (Power Supply) directly, if the cable is not long enough, you can use an F-F coupler (Splice Adapter) to extend your cable.
Antennas are built-in preamplifier* for outdoor usage.
(per Wikipedia). Locate the amplifier as close to the antenna as possible, so amplifying antenna signal and not amplifying line noise or interference on the cable run.*
Features:
Easy-to-follow user manual for perfect and Easy Snap-On Installation.
Built-in Low-Noise and High Gain Amplifier.
Built-in motor turns the antenna 360 degrees (Motor turns in both directions to avoid tangles)
Wireless remote controller (Control Box with Dual TV Outputs is included)
Recommended to be mounted 30 feet above ground
Recommended to be mounted 30 feet above the ground
NOTE: Cable channels are not available using the antenna, like ESPN.
Many antennas on the market are optimized to receive only UHF broadcasts and do not reliably receive VHF. All PBD TV antennas are precision-tuned to receive both UHF and VHF frequencies and will provide you with the most HD content.
Generally, the higher the antenna is above the ground, the better it performs. The amount and quality of the channels you receive will depend on the following:
Channels being broadcast in your area
Broadcast tower locations
Strength of the broadcast signals
Line of sight and environmental terrain
If you know (planned) antenna's height, you can specify that here in feet above ground level
Recommend PBD passive antenna, if very close to the broadcast towers, if your house is already wired,
If you live near broadcast towers, its possible to overamplify or boost the signal too much and worsen reception, we recommend passive antenna.
if your house is already wired,
Put B07PHMSTFF into Amazon search box for PBD passive antenna.
Support 2 TVs at the same time without extra splitter (Built-in)
This outdoor HDTV antenna is designed to receive digital TV UHF/VHF signals while providing high quality HDTV picture. You can enjoy high definition television without the high cost of cable or satellite. With a built-in rotor, Turn a full 360 degrees using the infrared remote control.
Specifications:
Working Frequency: VHF 170~230MHz | UHF 470~890MHz
Noise Figure:< =2.5dB
Typical Antenna Gain: VHF 28~32dB | UHF 32~36dB
Impedance: 75Ohm
Max Output Level:105dB u V
Main Voltage: AC120V±10%/60Hz
Operation Temperature: -10° C ~ 50° C
Coaxial Cable Length: 40FT RG6
Package Contents
1 - HDTV Yagi antenna built-in amplifier,
1 - Motor-fixed bolster with 40FT long RG6 Coaxial cable
1 - UL adapter, Control box, and Remote Control (AAA batteries NOT included)
1 - J-shape mounting Pole
Need an antenna that comes with all mounting accessories? Don't worry about searching for a suitable mounting pole, because one is already included in the box.
A Leader In Cutting-Edge Technology
Why do our antennas outperform the competition? The proof is in the patented SNAP-ON design. The 2608 series is engineered to respond to a greater range of frequencies along with a wide beam angle eliminating the need for rotation.
This outdoor HDTV antenna is designed as a perfect substitute for your annual cable to receive digital TV UHF/VHF signals. You can now enjoy free 4K high definition television without the high cost of cable or satellite. We also built it with motorized ability, you can adjust the antenna up to 360° now, simply by using the infrared remote control.
WARM TIPS
The antenna would work best with original accessories.
DO NOT use a switch or splitter between the Antenna and the control box. Splitter can be used after control box only!
Please connect the given cable to the control box (Power Supply) directly, if the cable is not long enough, you can use an F-F coupler (Splice Adapter) to extend your cable.
Antennas are built-in preamplifier* for outdoor usage.
(per Wikipedia). Locate the amplifier as close to the antenna as possible, so amplifying antenna signal and not amplifying line noise or interference on the cable run.*
Features:
Easy-to-follow user manual for perfect and Easy Snap-On Installation.
Built-in Low-Noise and High Gain Amplifier.
Built-in motor turns the antenna 360 degrees (Motor turns in both directions to avoid tangles)
Wireless remote controller (Control Box with Dual TV Outputs is included)
Recommended to be mounted 30 feet above ground
Recommended to be mounted 30 feet above the ground
NOTE: Cable channels are not available using the antenna, like ESPN.
Many antennas on the market are optimized to receive only UHF broadcasts and do not reliably receive VHF. All PBD TV antennas are precision-tuned to receive both UHF and VHF frequencies and will provide you with the most HD content.
Generally, the higher the antenna is above the ground, the better it performs. The amount and quality of the channels you receive will depend on the following:
Channels being broadcast in your area
Broadcast tower locations
Strength of the broadcast signals
Line of sight and environmental terrain
If you know (planned) antenna's height, you can specify that here in feet above ground level
Recommend PBD passive antenna, if very close to the broadcast towers, if your house is already wired,
If you live near broadcast towers, its possible to overamplify or boost the signal too much and worsen reception, we recommend passive antenna.
if your house is already wired,
Put B07PHMSTFF into Amazon search box for PBD passive antenna.
Support 2 TVs at the same time without extra splitter (Built-in)
