All CategoriesBuilt for How Business Buys.
All Categories- Free 30-day Returns
$103.41
Ships from United States.
Meet Your Seller
Silicognition wESP32 - ESP32 with Isolated Ethernet and 13W IEEE 802.3at PoE, 16MB Flash, MicroPython, Arduino, ESP-IDF Compatible
- Item #: 9SIVV5XMA36068
- Mfr. Part #: 824307456751
- ESP32-WROOM-32E module with 16MB flash, MicroPython pre-loaded
- IEEE 802.3at Type 1 Class 0 PoE with 13 W of power
- 12 V (optional 5 V) and 3.3 V power output
- High performance, reliable RTL8201 Ethernet PHY
- Compact size, high-quality 4-layer PCB
- Compatible with ESP-IDF, Arduino, MicroPython, and various other firmwares
- All revisions fully supported by ESPHome version 2022.12 upwards
- Qwiic connector for solderless applications
+
+
Overview
Specs
Reviews
The wESP32 is an ESP32 core board with wired Ethernet connectivity and Power over Ethernet that was designed to help Makers quickly create zero-setup, single-wire-install connected devices. By combining a powerful microcontroller with excellent community support, 13 W of power, and reliable connectivity in a compact footprint, the wESP32 gives you a head start in your next IoT design and allows you to focus on your application.
Newest revision 8 with RTL8201 PHY and Qwiic connector!
- Espressif Systems ESP32-WROOM-32E dual core 240 MHz with 16 MB of flash.
- Optional wESP32-Prog module for programming and/or USB serial console can be plugged in as needed or soldered in permanently.
- IEEE 802.3at Type 1 Class 0 compliant PoE with 12.95+ W of power available at the default 12 V output setting for V+.
- Optional 5 V output setting for V+ configurable by solder jumper with 5 W of power available.
- 3.3 V output with up to 6 W output power available (power taken from V+).
- Applying external power to V+ is supported, in case PoE is not available.
- Applying power through the wESP32-Prog[-C] USB port is supported (5 V or optional 12 V for Type C on V+).
- High performance RJ-45 jack and RTL8201 PHY with optimized data path for excellent data throughput.
- Compatible with PoE Mode A (power over data pairs) and PoE Mode B (power over spare pairs) and Auto-MDIX allowing the use of straight and cross-over Ethernet cables.
- Designed with full data and power path isolation to comply with the IEEE 802.3at 1500 Vrms isolation requirement.
- 802.11b/g/n WiFi and Bluetooth 4.2/LE for use as PoE wireless IoT access point.
- High quality 4-layer PCB and mounting hole designed to sink heat away from the PoE PD controller for optimal thermal performance.
- 20-pin header footprint with 3.3 V, V+ power and 15 of the ESP32 GPIOs available for your application.
- Qwiic connector on revision 8 for solderless applications.
- Compact 75 mm by 40 mm footprint with 4 mounting holes compatible with common M2.5 or 4-40 screws.
Warranty & Returns
Warranty, Returns, And Additional Information
Warranty
- Please contact the Seller directly for warranty information. Warranty information may also be found on the Manufacturer's website.
- CONTACT
Return Policies
- Return for refund within: 30 days
- Return for replacement within: 60 days
- This item is covered by Artbloont Return Policy
Manufacturer Contact Info
- For a directory of all our manufacturers, please click below.
- Manufacturers Directory
LOADING...