Features: Dimensions 24 inches (0.61M)x26 inches (0.66)
Highest quality static dissipative material-not the ineffective conductive system
Includes 10ft.(3M) grounding cord
Protect sensitive equipment from static damage
Rubber back-lies flat
Sits under CPU/VDT and keyboard
Top technical specifications-exceeds IBM & US military static control standards
Features: Assemble tweezers
Chip extractor
Enclosed in a zippered vinyl case
Nut driver - 1/4 inch
Nut driver - 3/16 inch
Philips screwdriver - #0
Phillips screwdriver - # 1
Slotted screwdriver - 1/8 inch
Slotted screwdriver - 3/16 inch
Three prong parts retriever
Torx screwdriver
Tube to store spare screws and nuts
Package Contents: One 6in wire stripper pliers
One 3-piece soldering aid set
One heat sink
One magnifying glass (3 x 38mm)
One stainless steel tweezers
One 6-piece precision screwdriver set
One 4.5in stainless steel side cutter pliers
One 5in stainless steel long nose pliers
One Phillips 3.2 x 75mm screwdriver
One Phillips 5.0 x 75mm screwdriver
One Slotted 5.0 x 75 mm screwdriver
One Slotted 3.2 x 75 mm screwdriver
One parts box
One 8-piece mini-electronic combination wrench set (5, 5.5, 6, 7, 8, 9, 10, 11mm)
One PU carrying case (315 x 240 x 93mm)
One soldering stand
One solder core
One 3-prong holder
One utility knife
one desoldering pump
One soldering iron
Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.
Features: Professional, Installer Grade 110/66 Impact Punch Down Tool
Both blades (110 & 66) have cutting and non-cutting sides
Handle compartment for storing blade not in use
Adjustable impact preference
Rugged, Polyacetal Resin frame for long-life use
Features: including each of the following:
PHILLIPS No. 00 x 50mm
PHILLIPS No. 1 x 50mm
SLOT 2.0 x 50mm
SLOT 2.4 x 50mm
SLOT 3.0 x 50mm
TORX T15 x 50mm
TORX T20 x 50mm
Specifications: Resting length: 2ft
Max stretched length: 6ft
Dissipates static electricity during electronic repair and maintenance
Adjustable wristband
Molded ends for long life use
Package Contents: ESD Anti-Static Wrist Strap with Ground
Features: Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables Tests USB and IEEE 1394 cables with optional adapters Built-in Tone Generator for tracing cable with standard Tone Probe Tests the grounding on shielded (screened) cable Verifies cable continuity, opens, shorts, and miswires Tests cable up to
Specifications: Essential Tools for Cable Installers or Telecom/LAN Personnel
Tests Cat5, Cat6, Cat6a and telephone cable assemblies
Cable tester combines main tester unit and removable remote tester unit
Identifies connection, no connection, short circuit or open circuit
Tests multiple types: RJ11, RJ12, RJ45
Fast and slow LED flashing modes during automatic testing
Designed to Make Your Work Easier
Includes cable tester, crimping tool, LSA punchdown tool and stripper tool
Stores away in convenient carrying case
Side A - Connector 1: RJ45 (FEMALE)
Side B - Connector 1: RJ45 (FEMALE)
Features: Cut and strip flat cable by one option Functions for 8P/RJ-45 and 6P/RJ-12, RJ-11 All steel construction for long term durability Crimps two sizes of plugs Built-in cutter and stripper Precision ground Compact size, easy to handle Ratchet mechanism to keep tool closed when not in use
WARNING: The products listed on this page and in this category may contain chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.