Specifications: Resting length: 2ft
Max stretched length: 6ft
Dissipates static electricity during electronic repair and maintenance
Adjustable wristband
Molded ends for long life use
Package Contents: ESD Anti-Static Wrist Strap with Ground
Features: Dimensions 24 inches (0.61M)x26 inches (0.66)
Highest quality static dissipative material-not the ineffective conductive system
Includes 10ft.(3M) grounding cord
Protect sensitive equipment from static damage
Rubber back-lies flat
Sits under CPU/VDT and keyboard
Top technical specifications-exceeds IBM & US military static control standards
Features: including each of the following:
PHILLIPS No. 00 x 50mm
PHILLIPS No. 1 x 50mm
SLOT 2.0 x 50mm
SLOT 2.4 x 50mm
SLOT 3.0 x 50mm
TORX T15 x 50mm
TORX T20 x 50mm
Features: Assemble tweezers
Chip extractor
Enclosed in a zippered vinyl case
Nut driver - 1/4 inch
Nut driver - 3/16 inch
Philips screwdriver - #0
Phillips screwdriver - # 1
Slotted screwdriver - 1/8 inch
Slotted screwdriver - 3/16 inch
Three prong parts retriever
Torx screwdriver
Tube to store spare screws and nuts
Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Features: Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables Tests USB and IEEE 1394 cables with optional adapters Built-in Tone Generator for tracing cable with standard Tone Probe Tests the grounding on shielded (screened) cable Verifies cable continuity, opens, shorts, and miswires Tests cable up to
Specifications: Contents:
LAN Cable Tester:
Tests RJ45, UTP, 10 Base-T, Token Ring, RJ-11/RJ-12 USOC and Coaxial BNC Cable
Test Cable for Continuity, Short, Open and Check Cable Type
Separated Remote Units Allow One Person Testing
Reversible Ratchet Handle
10pcs Assorted Bits:
Slotted: 5, 6mm
Philips: PH1, PH2
Pozi: PZ1, PZ2
Star: T10, T15, T20
1pc Adapter Bit for Socket
5pcs Socket Set: 3/16" - 1/4" - 5/16" - 11/32" - 3/8"
Anti-Static/Anti Shock Wrist Band
6pcs Precision Screwdriver
4-1/2" Side Cutter
5" Long Nose Pliers
Flashlight
RJ45 Modular Crimping Tool
8P8C Modular Plug
Protection Cap
Cable Tie
See Through Blow Mold Case
Package Contents: One 6in wire stripper pliers
One 3-piece soldering aid set
One heat sink
One magnifying glass (3 x 38mm)
One stainless steel tweezers
One 6-piece precision screwdriver set
One 4.5in stainless steel side cutter pliers
One 5in stainless steel long nose pliers
One Phillips 3.2 x 75mm screwdriver
One Phillips 5.0 x 75mm screwdriver
One Slotted 5.0 x 75 mm screwdriver
One Slotted 3.2 x 75 mm screwdriver
One parts box
One 8-piece mini-electronic combination wrench set (5, 5.5, 6, 7, 8, 9, 10, 11mm)
One PU carrying case (315 x 240 x 93mm)
One soldering stand
One solder core
One 3-prong holder
One utility knife
one desoldering pump
One soldering iron
WARNING: The products listed on this page and in this category may contain chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.