Feature: FOR LCD PROJECTOR INSTALLATIONS use the ACC109 extension column connector to join two peerless extension columns (EXT series) for a total extension of up to 20'.
FOR TV MOUNT INSTALLATIONS of equipment over 50 lbs., and the extension exceeds 12', a Stress Decoupler (models DCT 100/DCS 200) must be used in combination with EXT extension columns.
1200 lb Maximum Load Capacity
Movable: Adjustable up to 15° of forward tilt and -5° backward tilt for optimal viewing angle
Optional IncreLok feature offers fixed tilts at -5°, 0°, 5°, 10°, 15° increments screen placement
Horizontal screen adjustment of up to 8" (depending on screen model) for perfect screen placement
Feature: For Indoor/Outdoor, corrosion protection is needed
+15°/-5° tilt with 5° lock increments
8" of horizontal display adjustment
2.58" from the wall
Double stud mounting with 16", 20" & 24" stud placements
Movable: Adjustable 15° of forward tilt and -5° backward tilt
Horizontal screen adjustment of up to 6" (depending on screen model) for perfect screen placement
Feature: Universal mount fits displays with mounting patterns up to 895 x450mm (35.25" W x 17.72" H)
Low-profile design holds display only 1.73" (44mm) from the wall
For mounts requiring standard hardware, installed with a Philips screwdriver, please purchase SF670P
Easy hang wall plate allows a bolt to be pre-installed to ease wall plate installation
Lateral display adjustment up to11.25" (286mm)
1" of post-installation vertical adjustment provides flexibility in the installation
Includes fastener pack with all necessary mounting and display attachment hardware
For mounts requiring theft resistant hardware, installed with security tool (included), please purchase SF670
Feature: Includes all necessary wall and display attachment hardware
Mounts to wood studs, concrete, cinder block or metal studs (metal stud accessory required)
Landscape to portrait mounting options increases installation versatility. Please check display dimensions against the wall plate when used in portrait mode
Horizontal display adjustment up to 6.00" (152mm) for centering display on wall
Up to 0.25" (6mm) of vertical adjustment on each universal display adaptor bracket for postinstallation leveling and height adjustment fine-tuning
Low-profile design holds display only 1.20" (30mm)
Universal mount fits displays with mounting patterns up to 450 x 405mm (17.72" W x 15.95" H)
Integrated security options available
Design is UL listed and tested to four times stated load ...
Feature: Includes universal adapter plate for mounting holes up to 28.75 W x 17.05H
Pull-out swivel with up to 45° rotation depending on screen size
Locking tab provides optional swivel restriction to one side
3.4" deep in closed position, up to 11.9" fully extended
0°, 5° or 10° lockable incremental tilt
+/-1° roll for horizontal screen alignment during installation
Built-in cord management
Lock Key™ installation tool secures arms for screen installation
Lock-out screw prevents unwanted extension
Mounts to 16" wood studs, concrete, cinder block
Includes mounting and screen attachment hardware