
Quick View
Yamaha TT-N503WH MusicCast VINYL 500 Wi-Fi Turntable - White- Series: MusicCast VINYL 500
- Type: Turntable
- Color: White
- Inputs: Network Section
File Format: MP3 / WMA / MPEG-4 AAC: up to 48 kHz / 16-bit, ALAC: up to 96 kHz / 24-bit, FLAC / WAV / AIFF: up to 192 kHz / 24-bit, DSD: up to 11.2 MHz
Ethernet: Yes
Wi-Fi: Yes (2.4 / 5 GHz)
AirPlay: Yes
Bluetooth Section
Version/Profile: Ver. 4.2 / A2DP, AVRCP
Audio Codec: SBC, AAC
Maximum Communication Range: 10 m / 32.8 ft. 10 in. (without interferene)
Turntable
Drive Method: Belt drive
Motor: DC motor
Wow And Flutter: 0.2%
Platter: Aluminium die-cast (Diameter 30 cm)
Output Level: 450 mV (-7 dBV, with RIAA EQ, 1 kHz, 3.54 cm / sec), 2.5 mV ± 3 dBV (without RIAA EQ, 1 kHz, 3.54 cm / sec)
Signal To Noise Ratio: 67 dB or higher (A-weighted, 20 kHz, LPF)
Tonearm
Tonearm: Static balance straight tonearm
Effective Arm Length: 223.5 mm
Overhang: 19 mm
Stylus Pr...
- Model #: TT-N503WH

Quick View
Audio-Technica ATXP5 DJ Cartridge- Specification: Channel Separation: 20 (dB at 1 kHz)
Vertical Tracking Force: 2.0-4.0 g (3.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Output: 5.5 mV (1 kHz, 5 cm/sec.)
Channel Balance: 2.0 dB (1 kHz)
Stylus Shape: 0.3 x 0.7 mil elliptical
Cantilever: Carbon fiber-reinforced ABS
Mount: Half-inch
Replacement Stylus: ATN-XP5
Coil impedance: 6.7 k ohms (1 kHz)
DC resistance: 990 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 1.0 H (1 kHz)
Vertical tracking angle: 20 degree
- Frequency Response: 20-18,000 Hz
- Dimension: 0.68" x 0.67" x 1.20"
- Weight: 0.22 oz.
- Model #: ATXP5

Quick View
Audio Technica AT-VM530xEN Dual Moving Magnet Phono Cartridge with Nude Elliptical Stylus Orange/Black- Brand: Audio-Technica
- Color: Orange/Black
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 25,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude elliptical
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM530XEN

Quick View
Audio Technica AT-CAP1 Cartridge Alignment Protractor (Black)- Brand: Audio-Technica
- Color: Black
- Accessory Type: Cartridge Alignment Protractor
- Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points
Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion
Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
- Model #: AT-CAP1

Quick View
Audio Technica AT-HS6 Universal 1/2" Mount Headshell (Black)- Brand: Audio-Technica
- Color: Black
- Feature: Universal 1/2"-mount headshell for 4-pin turntable cartridges
Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
Finger lift enables precise stylus placement
Equipped with color-coded lead wires
Includes mounting screws
- Model #: AT-HS6BK

Quick View
Audio Technica AT-VM520xEB Dual Moving Magnet Phono Cartridge with Bonded Elliptical Stylus Navy/Black- Brand: Audio-Technica
- Color: Black / Blue
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Channel Separation: 24 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Elliptical bonded
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM520XEB