
Quick View
Audio Technica AT-CAP1 Cartridge Alignment Protractor (Black)- Brand: Audio-Technica
- Color: Black
- Accessory Type: Cartridge Alignment Protractor
- Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points
Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion
Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
- Model #: AT-CAP1

Quick View
Audio Technica AT-VMN10xCB Bonded Conical VMx Replacement Stylus, Blue- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Feature: The AT-VMx series brings new warmth and realism to Audio-Technica's premium dual moving magnet (MM) cartridge line, delivering an expansive soundstage that's alive with musical detail.
Aligning with our founder's belief that high-quality audio should be accessible to all, the AT-VMx Series is unmatched in delivering a truly affordable high-fidelity audio experience.
- Model #: AT-VMN10XCB

Quick View
Audio Technica AT628A Premium Disk Stabilizer - Stainless Steel (Sliver)- Brand: Audio-Technica
- Color: Silver
- Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality
Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole
Easy to grip with fingers
Approx. 450 g (15.9 oz)
Fits spindles up to 21 mm long
Works with a wide variety of turntables, including most Audio-Technica step-up and premium models*
Made in Japan
*Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
- Model #: AT628A

Quick View
Audio Technica AT-VM530xEN Dual Moving Magnet Phono Cartridge with Nude Elliptical Stylus Orange/Black- Brand: Audio-Technica
- Color: Orange/Black
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 25,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude elliptical
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM530XEN

Quick View
Audio Technica AT615a Precision Aluminum Turntable Bubble Level Aluminum (Silver)- Brand: Audio-Technica
- Color: Orange/Black
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 25,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude elliptical
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT615A

Quick View
Audio Technica AT-VM670xSP 78 RPM Monaural Dual Moving Magnet Phono Cartridge with Bonded Conical Stylus Grey- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Vertical Tracking Angle: 20°
Tracking Force: 4.5 to 5.5 g (5.0 g standard)
Stylus Construction: Conical bonded (3.0 mil)
Recommended Load Impedance: 47 k ohms
Coil Impedance: 1.6 k ohms (1 kHz)
DC Resistance: 375 ohms
Coil Inductance: 240 mH (1 kHz)
Output Voltage: 4.7 mV (1 kHz, 5 cm/sec.)
Horizontal/Vertical Output Ratio: 20 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
- Feature: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus
3.0 mil conical bonded stylus designed for playing 78 RPM records
Paratoroidal coils improve generating efficiency for enhanced transient response
PCUHD (Pure Copper Ultra High Drawability) coils - and fewer coil turns - deliver highly res...
- Model #: AT-VM670XSP

Quick View
Audio Technica AT-VM520xEB/H Dual Moving Magnet Headshell/Cartridge Combo Kit with Bonded Elliptical Stylus Blue- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Channel Separation: 24 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Elliptical bonded
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Feature: AT-VM520xEB Dual Moving Magnet Cartridge
- AT-VMx dual moving magnet cartridge with 0.3 x 0.7 mil elliptical bonded stylus
- 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with accuracy for outstanding audio reproduction
- Paratoroidal coils...
- Model #: AT-VM520XEB/H