
Quick View
Audio Technica AT-HS6 Universal 1/2" Mount Headshell (Black)- Brand: Audio-Technica
- Color: Black
- Feature: Universal 1/2"-mount headshell for 4-pin turntable cartridges
Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
Finger lift enables precise stylus placement
Equipped with color-coded lead wires
Includes mounting screws
- Model #: AT-HS6BK

Quick View
Audio Technica AT-VM95C Dual Moving Magnet Cartridge- Type: Turntable
- Accessory Type: Cartridges & Needles
- Specification: Vertical Tracking Angle: 23°
Vertical Tracking Force: 1.8-2.2 g (2.0g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Coil Impedance: 3.3 k ohms (1 kHz)
DC Resistance: 485 ohms
Coil Inductance: 550 mH (1 kHz)
Output Voltage: 4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance: 2.5 dB (1 kHz)
Stylus Shape: 0.6 mil conical
Cantilever: Aluminum
- Channel: 18 (dB at 1 kHz)
- Model #: AT-VM95C

Quick View
Audio Technica AT-CAP1 Cartridge Alignment Protractor (Black)- Brand: Audio-Technica
- Color: Black
- Accessory Type: Cartridge Alignment Protractor
- Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points
Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion
Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
- Model #: AT-CAP1

Quick View
Audio Technica AT-VM530xEN Dual Moving Magnet Phono Cartridge with Nude Elliptical Stylus Orange/Black- Brand: Audio-Technica
- Color: Orange/Black
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 25,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude elliptical
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM530XEN

Quick View
Audio Technica AT615a Precision Aluminum Turntable Bubble Level Aluminum (Silver)- Brand: Audio-Technica
- Color: Orange/Black
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 25,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude elliptical
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.2 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT615A

Quick View
Audio Technica AT-VMN10xCB Bonded Conical VMx Replacement Stylus, Blue- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Feature: The AT-VMx series brings new warmth and realism to Audio-Technica's premium dual moving magnet (MM) cartridge line, delivering an expansive soundstage that's alive with musical detail.
Aligning with our founder's belief that high-quality audio should be accessible to all, the AT-VMx Series is unmatched in delivering a truly affordable high-fidelity audio experience.
- Model #: AT-VMN10XCB

Quick View
Audio Technica AT628A Premium Disk Stabilizer - Stainless Steel (Sliver)- Brand: Audio-Technica
- Color: Silver
- Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality
Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole
Easy to grip with fingers
Approx. 450 g (15.9 oz)
Fits spindles up to 21 mm long
Works with a wide variety of turntables, including most Audio-Technica step-up and premium models*
Made in Japan
*Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
- Model #: AT628A

Quick View
Audio Technica AT-VM520xEB Dual Moving Magnet Phono Cartridge with Bonded Elliptical Stylus Navy/Black- Brand: Audio-Technica
- Color: Black / Blue
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Channel Separation: 24 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Elliptical bonded
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM520XEB

Quick View
Audio Technica AT-VM670xSP 78 RPM Monaural Dual Moving Magnet Phono Cartridge with Bonded Conical Stylus Grey- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Vertical Tracking Angle: 20°
Tracking Force: 4.5 to 5.5 g (5.0 g standard)
Stylus Construction: Conical bonded (3.0 mil)
Recommended Load Impedance: 47 k ohms
Coil Impedance: 1.6 k ohms (1 kHz)
DC Resistance: 375 ohms
Coil Inductance: 240 mH (1 kHz)
Output Voltage: 4.7 mV (1 kHz, 5 cm/sec.)
Horizontal/Vertical Output Ratio: 20 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
- Feature: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus
3.0 mil conical bonded stylus designed for playing 78 RPM records
Paratoroidal coils improve generating efficiency for enhanced transient response
PCUHD (Pure Copper Ultra High Drawability) coils - and fewer coil turns - deliver highly res...
- Model #: AT-VM670XSP

Quick View
Audio-Technica ATXP5 DJ Cartridge- Specification: Channel Separation: 20 (dB at 1 kHz)
Vertical Tracking Force: 2.0-4.0 g (3.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Output: 5.5 mV (1 kHz, 5 cm/sec.)
Channel Balance: 2.0 dB (1 kHz)
Stylus Shape: 0.3 x 0.7 mil elliptical
Cantilever: Carbon fiber-reinforced ABS
Mount: Half-inch
Replacement Stylus: ATN-XP5
Coil impedance: 6.7 k ohms (1 kHz)
DC resistance: 990 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 1.0 H (1 kHz)
Vertical tracking angle: 20 degree
- Frequency Response: 20-18,000 Hz
- Dimension: 0.68" x 0.67" x 1.20"
- Weight: 0.22 oz.
- Model #: ATXP5