Wireless Bridge Gigabit, 1Gbps Point to Point WiFi Bridge Outdoor Kit with 16dBi High-gain Antenna, 5.8G Long Range CPE Up to 5KM, Plug and Play, 27dbm, 24V POE Power, Ip65 Waterproof, 2-Pack

High SpeedWireless bridge set 27 dBm high wireless transmit power extends Wi-Fi building-to-building, transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved is 433Mbps. Transmission/receiver automatic networking, support ptp/ptmp. WDS networking mode, video network dual compatible
5KM Transmission DistanceThis wifi outdoor bridge built-in 16dBi directional antenna can effectively improve the transmission and reception performance of wireless signals. It supports 5KM long-distance wireless transmission. Wireless outdoor bridge can be widely used in daily life. Ideal for warehouses, gardens, barns, offices, shops, or garages next to your home
5.8G TechnologyThe 5.8G frequency adopts 11ac technology, which is better than 2.4G traditional CPE. It has better anti-interference, compatibility, and strong anti-adjacent channel interference. High-quality ABS material can resist rain, thunder, frost, and sun. Good choice for daily use
Plug and playCPE609 is powered by a 24V Poe adapter (included) and supports dial pairing without entering the GUI. wifi bridge kit are pre-configured, just connect the Poe power supply to achieve automatic pairing of the two bridges. It not only can help extend your home's network to the second building but also can be used for monitoring

Pole Mounting
1. Plug the dynamic stick into the bracket.

2. Screw the sealing nut and assembled parts, as well as tighten it.

3. Put the nock washer on the dynamic stick.

4. Assemble the mounting parts to the bridge.

5. Thread the open end of the pole strap through the two tabs on the bracket.

6. Lock and tighten pole strap to secure bracket to the pole

Wall Mounting
1. Plug the dynamic stick into the bracket

2. Screw the sealing nut and assembled parts, as well as tighten it

3. Put the nock washer on the dynamic stick.

4. Assemble the mounting parts to the bridge

5. Determine the mounting location. Mark and drill three

6. Put wall anchors into the holes and insert screw into the wall anchor.

7. Screw and secrue the bracket in the place