1PTP-Network Coverange2PTP-IP Camera3PTP-Multi-IP Camera4Multi to Multi Bridge5Point to Multi bridge Before logging in to the management page
Please set the IP address to (192.168.188.X
Master bridge IP192.168.188.253(H); Slave Bridge IP192.168.188.100(C)
Default user nam and password: admin
Show unit's name(H/C)/channel/signal No need to access into GUI, avoid the complex setup program when P- is displayed, the 2 units will communicate
passive Power over Ethernet (PoE)
For easy installation and lower cost
So it can be installed in areas where power outlets are not readily available
What is Range of the wireless bridge
The KuWFi CPE120 Standard range for an outdoor wireless bridge is approximately Point to Point 1-2KM.
What is a wireless bridge and how does it work ?
KuWFi wireless bridge is a device that links two wired networks, generally operating at two different physical locations, through wireless communications.
how to make pairing of the two units?
The KuWFi wireless bridge Pre-Program before packaged.
CPE120 ethernet bridge with one-key (H-C)bridge configure steps, simple to complete the entire system configuration, supply more efficient service for your networking
Why is the speed not good even at a distance of only 50 meters during testing
1There should be no obstacles or height differences between bridges
2Confirm that there is no interference, otherwise the speed may be low. You can log in to the device's management page to adjust the channel and obtain a better negotiation speed.
WiFi Bridge CPE200