CQCBD L12M4P62 L12L4P62 Battery for Lenovo Ideapad U530 Touch 80AS U530-20289 Series Notebook 2ICP6/55/85-2 121500199 121500200 (7.4V 52Wh/7100mAh) (Long Cable)

Efficient and Reliable
Grade A Cells
FCC / CE / RoHS Certified
More Charging Cycles
Long Lasting Performance
Battery Type: Li-ion
Voltage: 7.4V
Capacity: 52Wh/7100mAh
Battery Condition:100% Brand New
Compatible Part Numbers:
L12M4P62 L12L4P62 121500199 121500200 121500163 2ICP6/55/85-2
Compatible Laptop/Notebook Models:
For Lenovo Ideapad U430 Touch Series
For Lenovo Ideapad U530 Touch Series
For Lenovo Ideapad U530-20289 Touch Series
1. New battery received, discharge the battery to 5% (not 0%) for the fist use, then charge and cycle 3-4 times to wake up the new battery.
The important point is to perform a full discharge and charge every other month to extend the battery life.
2. Do not connect adapter for a long time while using the battery. It may damage the battery.
Avoid artificial shocks, disassembly, crush or puncture. Do not dispose of it in fire or water.
How to install a new battery:
1.emove the old battery, carefully install the new battery on the battery box, tighten the screws, and then connect the wires of the new battery.
2. If you have questions about installing a new battery, you can search for the installation of laptop/tablet models on YouTube.
This method may help you.
If the new battery is not recognized during the initial installation
1. please reinstall and check if the interface is fully connected.
Please disconnect the old battery, and hold down the power button for 20 seconds, then connect the new battery. This drains the residual or flea power and once the laptop is reassembled the battery will function properly.
2. Battery cannot be identified by your laptop or it doesn't seem to work. That may be caused by different situations. Please check by yourself first as below steps.
Could be caused by battery loose. Remove the battery and try to reinstall more than once.
May be due to conductive material damaged which the laptop motherboard and battery anode and cathode contact position, you can try to confirm it with your original battery.
Check whether the battery drive is in normal condition, if not, download the corresponding driver software to update.
Take out the battery and press the power button for about 15 seconds to consume the internal residual power (Do not connect the power cord), and then reinstall the battery.
You can try several times.
Within 2years, if the battery has any fault, please feel free to contactUs to replace it : For Optimal Use battery: