A cracked, flickering, or faded display can make your Dell Inspiron 14 Pro frustrating to use. Official repairs can be costly, but the solution is simpler than you think. This premium 14.0 -inch WUXGA IPS panel is a direct, drop-in replacement for the Dell Inspiron 14 Pro 5420, 5425, 7420, and 7425 2-in-1 series, restoring your device to its original visual quality without breaking the bank.
Compatible Laptop Models:
Dell Inspiron 14 Pro 5420
Dell Inspiron 14 Pro 5425
Dell Inspiron 14 Pro 7420 (including 2-in-1 P161G001)
Dell Inspiron 14 Pro 7425 2-in-1 (P161G003, P161G004)
Replaces OEM Part Numbers: Dell 50G18, 050G18, T63R4, 0T63R4, KJHRG, 0KJHRG, HWY0J, 0HWY0J, JJR4F, 0JJR4F, 28P7C, 028P7C, 10HJ3, 010HJ3, Y3G73, 0Y3G73, RWCF8, 0RWCF8, and others.
CRITICAL: Please confirm your original screen's connector type (30-pin eDP), size ( 14.0" ), and touch/non-touch status before ordering. Panels are shipped without brackets, cables, screws, or other mounting hardware please reuse your original parts.
Specifications
:
Screen Size: 14.0 inches
Resolution: 1920 x 1200 (WUXGA)
Refresh Rate: 60Hz
Panel Type: IPS (a-Si TFT-LCD, AAS mode)
Interface: 30-pin eDP (2 lanes, eDP 1.2, bottom right)
Brightness: 300 cd/m²
Contrast Ratio: 1000:1
Viewing Angle: 89/89/89/89
Display Colors: 16.7M, 45% NTSC
Surface: Matte (Hard coating 3H) or Touch (Glossy)
Backlight: WLED, 15K hours
What a Cracked or Failing Screen Costs You:
Poor visual experience, eye strain, lost productivity, and expensive official repairs.
Why Choose Our Screen?
Premium Innolux IPS Panel Not a low-quality copy; a screen that meets or exceeds OEM specifications.
WUXGA High Resolution Crisp, detailed visuals with 161 PPI pixel density.
Matte or Touch Options Choose the finish that matches your original screen.
Easy DIY Installation Standard 30-pin eDP interface with a simple plug-and-play design. No soldering, no complex modifications.
100% Tested Each screen is inspected before shipping to ensure it is free from defects.
12-Month Warranty Buy with confidence. If anything goes wrong, we've got you covered.
Installation Note:
Disconnect the battery and all power sources.
Remove the bezel (frame) around the screen.
Unscrew the mounting screws on the sides of the screen.
Gently disconnect the 30-pin eDP cable from the back of the screen.
Attach the cable to the new screen.
Secure the screen with the screws and replace the bezel.
Caution: The display assembly is delicate. We strongly recommend testing the new screen before fully securing it connect the screen, power on the laptop, and verify it displays correctly. Professional installation is recommended if you are not comfortable with DIY repairs. Tools are not included.
What's Included:
1 x Replacement LCD Screen ( 14.0", WUXGA, IPS, 30-pin eDP)