(9) | Write a Review
image for this item
Features
  • Connects 2 computer case fans to a single motherboard fan header;
    1 to 2 fan converter cable connects an additional fan to increase airflow in your computer case;
  • Motherboard 4-Pin receptacle connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans;
  • Fans can spin at the same speed using software from a motherboard equipped with PWM control;
  • MASTER/SLAVE FAN PLUGS have a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan. The other 3 pin fan connector omits the RPM signal pin for tandem fan speeds with both fans;
  • 3-PIN & 4-PIN FAN COMPATIBLE with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240

Note:
 

  • 3pin fans are run in full speed, no PWM function
  • Only the fan on 4-pins connector is used for monitoring.
  • All connected fans are following the same PWM signa, speed control is the same for all fans when use fan controller software like AI stuite/Xspert FAN and EASY TUNE, etc
  • PWM capable connectors must necessarily be 4-pin, but not all 4-pin motherboard connectors implement or enable the PWM signal modulation by default. Please carefully consult your motherboard documentation in this respect.
image for this item
  • PWM 4pin to 2 ports fanout splitter cable
  • Supports two fans connect to motherboard CPU_FAN header
image for this item
  • PWM TX4 4Pin header connect to motherboard CPU_FAN or SYS_FAN
image for this item
  • Just one header include 4 wires for PWM control
  • The other header just include 3 wires
  • Please make sure the header with full 4pin tips always connect fan preferentially
Specification
Type PWM Fan Power Splitter Cable
Cable Length 10 Inches
Conductor 22AWG Copper
Connector A 1 x 4pin PWM fan TX4 Female
Connector B 2 x 4pin PWM Fan TX4 Male
Power supports Motherboard CPU_FAN or SYS_FAN
Compatible Compatible with 3-Pin & 4-Pin Fan