Environmentally Hardened Design The Industrial 8-Port Gigabit 802.3 at PoE Switch, IGS-10020HPT is equipped with rugged IP30 metal case for stable operation in heavy Industrial demanding environments. With IP30 industrial case protection, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 Degree C, the IGS-10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.
Redundant Ring, Fast Recovery for Surveillance System The IGS-10020HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol ( 802.1 w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-10020HPT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
Physical Port • 8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 with IEEE 802.3 af / 802.3 at PoE Injector • 2 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection • One RJ-45 console interface for basic management and setup Power over Ethernet • Complies with IEEE 802.3 af / IEEE 802.3 at Power over Ethernet / End-Span PSE • Up to 8 IEEE 802.3 af / 802.3 at devices powered • Supports PoE Power up to 30.8 Watts for each PoE ports • Auto detect powered device (PD) • Circuit protection prevent power interference between ports • Remote power feeding up to 100m • PoE Management features - IEEE 802.3 af and IEEE 802.3 at mode switch control - Total PoE power budget control - Per port PoE function enable/disable - PoE Admin-mode control - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - Temperature Threshold Control - PoE Usage Threshold Control - PD Alive Check - PoE schedule Industrial Case / Installation • IP30 Aluminum metal case protection • DIN Rail and Wall Mount Design • 48V DC, redundant power with polarity reverse protect function • Supports EFT protection 6000 VDC for power line • Supports 6000 VDC Ethernet ESD protection • -40 to 75 Degree C operating temperature Digital Input / Digital Output • 2 Digital Input (DI) • 2 Digital Output (DO) • Integrate sensors into auto alarm system • Transfer alarm to IP network via email and SNNP trap Layer 2 Features • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3 x PAUSE frame flow control (Full-Duplex) • High performance of St
Redundant Ring, Fast Recovery for Surveillance System The IGS-10020HPT supports redundant ring technology and features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates advanced Redundant Ring technology, Spanning Tree Protocol ( 802.1 w RSTP), and redundant power supply system into customer’s industrial automation network to enhance system reliability and uptime in harsh factory environments. The IGS-10020HPT also protects customer’s industrial network connectivity with switching recovery capability that is used for implementing fault tolerant ring and mesh network architectures. If the Industrial network was interrupted accidentally, the fault recovery times could be less than 50ms to quickly bring the network back to normal operation.
Physical Port • 8-Port 10/100/1000Base-T Gigabit Ethernet RJ-45 with IEEE 802.3 af / 802.3 at PoE Injector • 2 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection • One RJ-45 console interface for basic management and setup Power over Ethernet • Complies with IEEE 802.3 af / IEEE 802.3 at Power over Ethernet / End-Span PSE • Up to 8 IEEE 802.3 af / 802.3 at devices powered • Supports PoE Power up to 30.8 Watts for each PoE ports • Auto detect powered device (PD) • Circuit protection prevent power interference between ports • Remote power feeding up to 100m • PoE Management features - IEEE 802.3 af and IEEE 802.3 at mode switch control - Total PoE power budget control - Per port PoE function enable/disable - PoE Admin-mode control - PoE Port Power feeding priority - Per PoE port power limit - PD classification detection - Temperature Threshold Control - PoE Usage Threshold Control - PD Alive Check - PoE schedule Industrial Case / Installation • IP30 Aluminum metal case protection • DIN Rail and Wall Mount Design • 48V DC, redundant power with polarity reverse protect function • Supports EFT protection 6000 VDC for power line • Supports 6000 VDC Ethernet ESD protection • -40 to 75 Degree C operating temperature Digital Input / Digital Output • 2 Digital Input (DI) • 2 Digital Output (DO) • Integrate sensors into auto alarm system • Transfer alarm to IP network via email and SNNP trap Layer 2 Features • Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3 x PAUSE frame flow control (Full-Duplex) • High performance of St
