Systor Systems logo

Systor M.2 NVMe PCIe/SATA SSD/HDD duplicators are completely standalone units that can clone or sanitize a number of different media types. Easily insert and copy (or erase) M.2 or SATA solid state SSD drives or HDD hard disk drives with a single touch of a button. These duplicators consistently perform copy sessions with no speed degradation even when the number of target devices increase. Various copying and erasing modes help in managing different task requirements for duplicating and wiping your storage media.These high-speed, high-performance M2 copiers are the perfect solution for business (small to enterprise), education, and government entities (military, law enforcement, etc.) where copying and erasing device data needs to be accomplished with precision and minimal time.

* Duplication speed will vary depending on read/write transfer rates of master (source) and target (blank) drives.

M.2 PCIe NVMe duplicator SATA HDD SSD supported devices
FLEXIBLE CROSS INTERFACE DUPLICATION

Automatically detect NVMe and/or SATA signals to easily copy devices from one interface to another, such as:

  • M.2 (SATA) to 2.5 HDD/SSD (SATA)
  • M.2 (NVMe/SATA) to M.2 (NVMe/SATA)
image for this item
NVME SIZE COMPATIBILITY

Compatible with all sizes of:

  • NVME M.2 SSD (Types 2230, 2242, 2260, 2280, 3030, 3042, 3060, 22110, 3080)
  • PCIe SSD (full and low profiles)
image for this item
COMPARE FUNCTION + CRC CHECKSUM

Performs bit-by-bit cyclic redundancy check (CRC) to ensure copies are identical for every duplication session.

INTELLIGENT DUPLICATION (COPY MODES)
System & Files
System and Files (Quick Copy Mode)

Copies only the data area and skips empty space, reducing the copy duration time.

All Partitions
All Partitions

Can be set to copy or skip HPA, DCO, unknown partitions, modified formats, etc.

Whole Media
Whole Media

Copies from the initial sector to the end, bit-by-bit. There are no format limitations in this mode. Supports all systems and proprietary formats, along with various brands.

Percentage Copy
Percentage Copy

Set a selected percentage of source/master capacity to copy.

Deep Analysis
Deep Analysis

Analyzes the whole device then copies the data area. The target device is required to be wholly cleaned prior to copy using the Secure Erase function.

SANITIZATION METHODS (ERASE MODES)
image for this item
Quick Erase

Erases the device's index table, and only takes a few seconds to complete.

image for this item
Full Erase

Erases the entire device.

image for this item
DoD Erase

Complies with the erasure standards of the U.S. Department of Defense (DoD) 5220.22-M.

DoD EraseComp
DoD EraseComp

Erases entire device(s) and verifies complete erasure, in compliance with the DoD 5220.22-M standard.

7-pass Erase
7-Pass Erase

Erases entire device(s) 7 times, in compliance with the DoD 5220.22-M standard.

Secure Erase
Secure Erase

Complies with standards of the National Institute of Standards and Technology (NIST) 800-88.

Enhanced Secure Erase
Enhanced Secure Erase

Implements device-specific procedures to overwrite data, including in reallocated sectors, and may also destroy the drive's internal encryption key to ensure all user data is permanently unrecoverable.

Event Log Report
EVENT LOG REPORT

The Log Report Management Tool assists users with monitoring, recording and managing the entire duplication process. Download onto an SD card and view detailed information for each port, such as identifying the slowest writing device, to keep the operation running efficiently.

PC Link
FILE TRANSFER FROM PC

No need to use an extra physical device as the source drive. Send your source image directly from a computer to the duplicator for future copy sessions via USB cable.

Products
Brand Systor Systor Systor Systor Systor Systor
Speed 24GB/min (400MB/sec) 24GB/min (400MB/sec) 18GB/min (300MB/sec) 18GB/min (300MB/sec) 12GB/min (200MB/sec) 12GB/min (200MB/sec)
Target size 1 to 5 1 to 10 1 to 7 1 to 11 1 to 11 1 to 23
Media supported M.2 NVMe, M.2 SATA, 2.5" HDD SATA, 2.5" SSD SATA M.2 NVMe, M.2 SATA, 2.5" HDD SATA, 2.5" SSD SATA M.2 NVMe, M.2 SATA, 3.5" HDD SATA, 2.5" HDD SATA, 2.5" SSD SATA M.2 NVMe, M.2 SATA, 3.5" HDD SATA, 2.5" HDD SATA, 2.5" SSD SATA M.2 NGFF SATA SSD, M.2 NVMe PCIe SSD, AHCI M.2 NGFF SATA SSD, M.2 NVMe PCIe SSD, AHCI
M.2 key supported M key, B+M key M key, B+M key M key, B+M key M key, B+M key M key, B+M key M key, B+M key
File systems supported FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX) FAT16/32/64, Windows (NTFS), Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX)
DoD Erase (compliant with DoD 5220.22-M Standard) Yes Yes Yes Yes Yes Yes
Hot swap supported Yes Yes Yes Yes Yes Yes
Skip bad sectors Yes Yes Yes Yes Yes Yes
Standalone operation Yes Yes Yes Yes Yes Yes