Support existing CAT-5 UTP cabling with automatic crossover detection
Single-lane(x1)PCI-Express End-point controller with PHY integrated
Compliant with PCI Express 2.0 Gen1
Compliant with PCI Express M.2 Specification version1.0
Compliant with PCI Power Management 1.2
Connector type: M.2 B+M KEY, size: 22 x 80mm
Integrated 10M BASE-Te and 100/1000M/2.5G/5GBASE-T 802.3 compatible transceiver
Supports 5G, 2.5G and 1G Lite mode
Auto-Negotiation with Extended Next Page capability(XNP)
Support PCI Express Specification Revision 2.1
Supports pair swap/polarity/skew correction
Crossover Detection& Auto-Correction
Supports 1-Lane 2.5/5Gbps PCI Express Bus
Supports hardware ECC(Error correction code)function
Supports hardware CRC(Cyclic Redundancy Check)function
Supports PCI MSI (Message Signaled Interrupt)and MSI-X
Transmit/Receive on-chip buffer support
Supports ECMA-393 ProxZzzy Standard for sleeping hosts
Wake-On-LAN and RealWow! Technology (remote wake-up)supports
Compatible with IEEE802.3,IEEE802.3u,IEEE802.3ab
Supports IEEE1588v1,IEEE1588v2,IEEE80.2AS time synchronization
Supports IEEE802.1Qav credit-based shaper algorithm
Supports IEEE802.1P Layer 2 Priority encoding
Supports IEEE802.1Q VLAN tagging
Supports IEEE802.1ad Double VLAN
Supports IEEE802.3az (Energy Efficient Ethernet)
Supports IEEE802.3bz(2.5GBase-T)
Supports full duplex flow control(IEEE802.3x)
Supports jumbo frame to 16K bytes
Supports Virtual Machine Queue(VMQ)
Supports quad core Receive Side Scaling(RSS)
Supports Protocol Offload (ARP&NS)
Drivers for Vista /Win7 / Sever2008/Win8/ Sever 2012 / Win10 /Win11 / Linux, DOS
Package content
1 x M.2 B+M RTL8126 5GBASE-T Ethernet Adapter
1 x Users Manual
1 x CD
1 x Low profile bracket
Accessories
System Requirements
Linux ,Win7/Win8/Server2008/Win8.1/Server2012/Win10/Win11
One available M.2 B+M KEY slot
Hardware installation
1.Turn off the computer and unplug the power cord
2.Remove the computer cover and the adapter slot cover from the slot that matches your adapter
3.Insert the adapter edge connector into the slot and secure the bracket to the chassis
4.Replace the computer cover ,then plug in the power cord
5.Power on the computer
Install Drivers and software
Windows Operating Systems
1. Please insert the CD driver bound into your CD-ROM Drive.
2. Double-click to open the CD-ROM drive and find the driver corresponding to the system.
3.1 For Windows® Win7, Server 2008 R2(32/64 bit)
TypeRTL8126\Windows\Win7_Server2008 R2\Install_Win7_7127_10222019\setup.exe, Double click it.
3.2 For Windows® Win8, Win8.1 Server2012(32/64 bit)
TypeRTL8126\Windows\Win8_8.1_Server2012\Install_Win8_8.1_8073_10222019 \setup.exe, Double click it.
3.3 For Windows® Win10 (32/64 bit)
TypeRTL8126\Windows\Win10\Install_Win10_10036_10222019\setup.exe, Double click it.
3.4 For Windows® Win11 (32/64 bit)
Type RTL8126\Windows\Win11\Install_PCIE_Win11_11.4.1201.2021_01182022.exe
4. Follow the on-screen instructions to complete the installation.
Support
More information and settings, please refer to the Adapter User Guides or you can contact us.
