USB 3.0 to IDE SATA Adapter Hard Drive Reader
Why 10,000+ Users Trust This Adapter
Connect 3 Drives at Once
Simultaneously access one SATA drive and two IDE drives. Back up, compare, or migrate data without swapping cables.
USB 3.0 SuperSpeed
Transfer a full 4K movie in seconds. Up to 5Gbps - 10x faster than USB 2.0. Fully backward compatible with USB 2.0/1.1.
Supports Drives Up to 6TB
Compatible with drives from 80GB to 6TB. Recover old archives, migrate storage, or repurpose legacy hardware with ease.
Zero Setup Required
Plug in and your OS recognizes the drive instantly - no drivers, no software. Hot-swap supported. On/Off switch protects your drive.
Works With All Your Legacy Drives
This universal adapter supports 2.5" and 3.5" SATA HDD/SSD, 2.5" and 3.5" IDE HDD, and optical drives including DVD-ROM, CD-ROM, CD-RW, and DVD-RW.
Compatible with Windows 10/8/7/Vista, Linux, Mac OS 9.0-10.13.3, PS5, and Xbox One. Supports major brands including WD, Seagate, Toshiba, Samsung, and Hitachi.
No drivers required. Your operating system detects the connected drive automatically.
Ready to Use in 4 Simple Steps
Step 1: Plug your SATA or IDE hard drive into the corresponding port on the adapter.
Step 2: Connect the 12V/2A power adapter. For 3.5" IDE drives, also attach the included 4-pin power cable.
Step 3: Connect the USB 3.0 cable to any available USB port on your laptop or desktop.
Step 4: Flip the power switch — the blue LED light confirms the drive is active and ready.
Note: New or unformatted drives may need to be initialized via Disk Management (Windows) or Disk Utility (Mac) before they appear.
Full Specifications and Package Contents
Package Contents
- USB 3.0 to IDE/SATA Adapter × 1
- USB 3.0 Cable × 1
- 12V / 2A Power Adapter × 1
- 4-Pin Power Cable × 1 (for 3.5" IDE drives only)
Compatible Use Tips
For best results, connect one IDE drive at a time alongside your SATA drive.
The included 4-pin power cable is designed specifically for 3.5 inch IDE drives.
Mac users can enjoy full compatibility on OS 9.0 through 10.13.3.
If using a brand new drive, please initialize it through your system's disk management tool so it can be recognized.
Interface and Transfer Speed
Host interface: USB 3.0 (backward compatible with USB 2.0 / 1.1). Drive interfaces: SATA I/II/III, IDE 40-pin, IDE 44-pin. Transfer speed: up to 5Gbps. LED indicator: Power and Activity (Blue). On/Off switch included for drive protection.
Drive and System Compatibility
Supported drives: 2.5" and 3.5" SATA HDD/SSD, 2.5" and 3.5" IDE HDD, Optical drives (DVD-ROM, CD-RW, DVD-RW). Max drive capacity: 6TB. OS: Windows 10/8/7/Vista, Linux, Mac OS 9.0-10.13.3. Devices: PS5, Xbox One.
USB 3.0 to IDE SATA Adapter Hard Drive Reader
Why 10,000+ Users Trust This Adapter
Connect 3 Drives at Once
Simultaneously access one SATA drive and two IDE drives. Back up, compare, or migrate data without swapping cables.
USB 3.0 SuperSpeed
Transfer a full 4K movie in seconds. Up to 5Gbps - 10x faster than USB 2.0. Fully backward compatible with USB 2.0/1.1.
Supports Drives Up to 6TB
Compatible with drives from 80GB to 6TB. Recover old archives, migrate storage, or repurpose legacy hardware with ease.
Zero Setup Required
Plug in and your OS recognizes the drive instantly - no drivers, no software. Hot-swap supported. On/Off switch protects your drive.
Works With All Your Legacy Drives
This universal adapter supports 2.5" and 3.5" SATA HDD/SSD, 2.5" and 3.5" IDE HDD, and optical drives including DVD-ROM, CD-ROM, CD-RW, and DVD-RW.
Compatible with Windows 10/8/7/Vista, Linux, Mac OS 9.0-10.13.3, PS5, and Xbox One. Supports major brands including WD, Seagate, Toshiba, Samsung, and Hitachi.
No drivers required. Your operating system detects the connected drive automatically.
Ready to Use in 4 Simple Steps
Step 1: Plug your SATA or IDE hard drive into the corresponding port on the adapter.
Step 2: Connect the 12V/2A power adapter. For 3.5" IDE drives, also attach the included 4-pin power cable.
Step 3: Connect the USB 3.0 cable to any available USB port on your laptop or desktop.
Step 4: Flip the power switch — the blue LED light confirms the drive is active and ready.
Note: New or unformatted drives may need to be initialized via Disk Management (Windows) or Disk Utility (Mac) before they appear.
Full Specifications and Package Contents
Package Contents
- USB 3.0 to IDE/SATA Adapter × 1
- USB 3.0 Cable × 1
- 12V / 2A Power Adapter × 1
- 4-Pin Power Cable × 1 (for 3.5" IDE drives only)
Compatible Use Tips
For best results, connect one IDE drive at a time alongside your SATA drive.
The included 4-pin power cable is designed specifically for 3.5 inch IDE drives.
Mac users can enjoy full compatibility on OS 9.0 through 10.13.3.
If using a brand new drive, please initialize it through your system's disk management tool so it can be recognized.
Interface and Transfer Speed
Host interface: USB 3.0 (backward compatible with USB 2.0 / 1.1). Drive interfaces: SATA I/II/III, IDE 40-pin, IDE 44-pin. Transfer speed: up to 5Gbps. LED indicator: Power and Activity (Blue). On/Off switch included for drive protection.
Drive and System Compatibility
Supported drives: 2.5" and 3.5" SATA HDD/SSD, 2.5" and 3.5" IDE HDD, Optical drives (DVD-ROM, CD-RW, DVD-RW). Max drive capacity: 6TB. OS: Windows 10/8/7/Vista, Linux, Mac OS 9.0-10.13.3. Devices: PS5, Xbox One.
