The Phobya Dual Monitor Arm is the ideal prerequisite to ensure an ergonomic and tidy workplace. The monitor arms and the further features of the Phobya monitor mount, such as cable management and the dual USB 3.0 hub, allow an optimal alignment of the monitors and provide a tidy workplace. Easy MountingThe Dual Monitor Arm is mounted directly to the edge of the table with a table clamp. Alternatively, some tabletops offer holes to quickly and easily attach the monitor arm with the included long screw and wing nut. The tabletop may be between 10 and 100 mm thick.
Large swivel rangeThe entire monitor stand can be rotated 360° and adjusted in height by 14 cm. The individual arms can be rotated 270° at the lower part and 360° at the upper arm. The mounting head can also be rotated another 180°. This gives you an incredible number of options for aligning each monitor. The mounting head also allows for tilt angles from -45° to +60°. The mounting head also offers a pivot function to tilt monitors 90° in any direction for better display of long texts. Which monitor sizes fit? The Phobya Dual Monitor mount can accommodate monitors ranging in size from 17" to 34", regardless of monitor format.
However, the total width of a single monitor must not exceed 84 cm. The monitors are mounted using a VESA mount in 75 or 100 format, which is a format supported by almost all mountable monitors. Many features that make life easierThe height adjustment of the individual arms is facilitated by gas pressure springs, the tension of which can be adjusted to the weight of the respective monitor using a hexagonal wrench. Since both arms can be adjusted independently, the use of different monitors is not a problem. Most of the monitor cables can be hidden in the monitor arm.
On the upper arm half, a plastic cover can simply be pulled off and the cables can then be routed underneath. On the lower half of the arm, the cover must be removed with a screw, but here too the mo
Large swivel rangeThe entire monitor stand can be rotated 360° and adjusted in height by 14 cm. The individual arms can be rotated 270° at the lower part and 360° at the upper arm. The mounting head can also be rotated another 180°. This gives you an incredible number of options for aligning each monitor. The mounting head also allows for tilt angles from -45° to +60°. The mounting head also offers a pivot function to tilt monitors 90° in any direction for better display of long texts. Which monitor sizes fit? The Phobya Dual Monitor mount can accommodate monitors ranging in size from 17" to 34", regardless of monitor format.
However, the total width of a single monitor must not exceed 84 cm. The monitors are mounted using a VESA mount in 75 or 100 format, which is a format supported by almost all mountable monitors. Many features that make life easierThe height adjustment of the individual arms is facilitated by gas pressure springs, the tension of which can be adjusted to the weight of the respective monitor using a hexagonal wrench. Since both arms can be adjusted independently, the use of different monitors is not a problem. Most of the monitor cables can be hidden in the monitor arm.
On the upper arm half, a plastic cover can simply be pulled off and the cables can then be routed underneath. On the lower half of the arm, the cover must be removed with a screw, but here too the mo
