Specifications:
Product model: YYI-2
Work Voltage:
5-24V DC
Detection range: DC current between 0~10A
Detection accuracy: 0.01A (10ma)
Standby current: about 20ma
Relay output: It can control the on/off of DC line within 5A
With error calibration function, it can turn off display for a long time and reduce power consumption
Function Description:
P-11: When the measured current is greater than I1, the relay is closed; when the measured current is less than I1 again, the relay is disconnected.
P-12: When the measured current is greater than I1, the relay pulls in; always keeps the pull-in until the board is powered off.
P-21: When the measured current is greater than I2, the relay is closed; when the measured current is less than I1, the relay is disconnected.
P-22: When the measured current is greater than I2, the relay pulls in; always keeps sucking until the board is powered off.
P-31: When the measured is less than I1, the relay is closed; when the current is greater than I2, the relay is disconnected.
P-32: When the measured current is less than I1, the relay pulls in; always keeps the pull-in until the board is powered off.
P-41: When the measured current is between I1 and I2, the relay is closed, and the relay is disconnected in other cases;
P-42: When the measured current is between I1 and I2, the relay pulls in; always keeps the pull-in until the board is powered off.
P-51: When the measured current is less than I1 or greater than I2, the relay is closed, and the relay is disconnected in other cases;
P-52: When the measured current is less than I1 or greater than I2, the relay pulls in; always keeps the pull-in until the board is powered off.
Setting Instructions:
