The Alphacool Eistools Modding Cutter is a versatile tool that can be used for many jobs. Not only used to cut Alphacool Eistubes PETG HardTubes and standard soft tubing, the Eistools Modding Cutter will come in handy for many other jobs whilst modding thanks to the adjustable angle. PETG Tube No Longer Sawed? The Alphacool PETG Eistubes are relatively soft for HardTubes and therefore can not only be bent at relatively low temperatures, they can also be cut perfectly with the Eistools Modding Cutter. The tube is placed on the protractor and then simply cut as if with scissors.
The procedure is just as easy with normal hoses. But What's With The Angles? Those who want to up their modding game by using HardTubes, can also change various things on the case and other components. There are a lot of things that must be cut. Cable sleeving, insulation, LED Strips and various caps to cover certain parts in the PC and much more. Here one often needs perfect angled cuts. How To Use The Angle? The support surface is generously chosen and the angle can be adjusted up to a cutting edge of 45°.
This is done in 15° increments, whereby the angle always engages cleanly and thus remains in position. The Blade Is Blunt, What Now? It is important to keep the blade sharp, so of course, you can change the blade. All you need to do is loosen a screw on the side using an 8 mm open-end wrench and then replace the blunt blade with a new one. A 3-pack of replacement blades for the Eistools Modding Cutter is also available from Alphacool so you can stock up and always be prepared.
The Eistools Modding Cutter is a multi-use tool that modders and watercoolers should not be without. It is versatile and makes cutting the Eistube PETG HardTubes a breeze.
The procedure is just as easy with normal hoses. But What's With The Angles? Those who want to up their modding game by using HardTubes, can also change various things on the case and other components. There are a lot of things that must be cut. Cable sleeving, insulation, LED Strips and various caps to cover certain parts in the PC and much more. Here one often needs perfect angled cuts. How To Use The Angle? The support surface is generously chosen and the angle can be adjusted up to a cutting edge of 45°.
This is done in 15° increments, whereby the angle always engages cleanly and thus remains in position. The Blade Is Blunt, What Now? It is important to keep the blade sharp, so of course, you can change the blade. All you need to do is loosen a screw on the side using an 8 mm open-end wrench and then replace the blunt blade with a new one. A 3-pack of replacement blades for the Eistools Modding Cutter is also available from Alphacool so you can stock up and always be prepared.
The Eistools Modding Cutter is a multi-use tool that modders and watercoolers should not be without. It is versatile and makes cutting the Eistube PETG HardTubes a breeze.
