TheSK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGBis an expansion tank, distro plate and pump solution all in one. It is intended for use in the Lian Li PC-O11 EVO RGB. The pump solution is located on the rear. A DDC or D5 pump can be installed. Designed for CPU and GPU waterblocksIt is versatile and supports a wide range of hardware and radiator options. A total of 15 ports provide many connection options for the GPU and CPU. For this reason, the distro plate can be used not only in the Lian Li PC-O11 EVO RGB case, but also in numerous other cases.
Matching Cases• Lian Li O11D EVO• Lian Li O11D EVO XL• Lian Li O11D EVO RGB• Lian Li O11 EVO RGB Automobili Lamborghini Edition• Lian Li O11 VisionDistro Pate, reservoir and pump solution in oneThe large chamber in the middle provides sufficient volume of coolant, which is transported through the channels around this chamber to the individual components. The coolant is transported by the pump integrated into the distroplate, which is attached to the rear. This can be a DDC or D5 pump. A D5 ring, seal and screws are supplied for installation.
If you decide to mount a DDC pump, mounting screws must be purchased separately. must be purchased separately. Although the pump is located on the back of the Distroplate, it is positioned centrally so that it cannot collide with the fan grille. is excluded. Spacers are also not required in the Lian Li PC-O11 EVO RGB case, as the D5 pump is recessed halfway into the distro plate and does not touch the side wall of the case. Easy mounting of the Distroplate on 120mm or 140mm fan bracketsThe threads provided on the back of the Distroplate make installation effortless.
There are 18x M4 threads available for this purpose, to securely attach the distroplate to a 120mm or 140mm fan bracket. Regardless of where the mainboard is mounted on the mainboard tray, the distroplate can then be aligned using the
Matching Cases• Lian Li O11D EVO• Lian Li O11D EVO XL• Lian Li O11D EVO RGB• Lian Li O11 EVO RGB Automobili Lamborghini Edition• Lian Li O11 VisionDistro Pate, reservoir and pump solution in oneThe large chamber in the middle provides sufficient volume of coolant, which is transported through the channels around this chamber to the individual components. The coolant is transported by the pump integrated into the distroplate, which is attached to the rear. This can be a DDC or D5 pump. A D5 ring, seal and screws are supplied for installation.
If you decide to mount a DDC pump, mounting screws must be purchased separately. must be purchased separately. Although the pump is located on the back of the Distroplate, it is positioned centrally so that it cannot collide with the fan grille. is excluded. Spacers are also not required in the Lian Li PC-O11 EVO RGB case, as the D5 pump is recessed halfway into the distro plate and does not touch the side wall of the case. Easy mounting of the Distroplate on 120mm or 140mm fan bracketsThe threads provided on the back of the Distroplate make installation effortless.
There are 18x M4 threads available for this purpose, to securely attach the distroplate to a 120mm or 140mm fan bracket. Regardless of where the mainboard is mounted on the mainboard tray, the distroplate can then be aligned using the
