(3) | Write a Review
SSK Type C SATA M.2 SSD Enclosure Adapter compatible with multi-OS
Only for M.2 NGFF SATA SSD

SSK SATA M.2 SSD Enclosure adopts high performance controller chip, Type C Gen 1 interface, up to 5Gbps high-speed data transmission.Also inclouded Type-c adapter,meets all of your needs,This USB A to USB C adapter is compatible with ANY laptop/tablet/smartphone with a Type-C port . Complies with UASP which can effectively improve the speed.Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.

SSD needs to be fully inserted for working
SSD needs to be fully inserted for working

If you encounter a situation where your hard disk cannot be read, please confirm your hard drive is M.2 NGFF SATA SSD.Secondly, please confirm whether your SSD is fully inserted into the M.2 NGFF Slot. If not, you need to push the SSD into the M.2 NGFF Slot at a 45 degree angle.The pins of the SSD will be fully seated and covered, On the other hand, please gently press the plastic lock catch back to make it fix your SSD.

Attention: If your ssd size is 22*80mm, please press down the plastic lock catch A and B, so it will no longer push up the SSD, and will never make it bend.Please read our User Manual carefully.

Support SSD Size

Supports SATA-Based M.2/NGFF(B Key&B+M Key) 2242 2260 2280mm SSD.

SSK M.2 SATA SSD Enclosure connector only has one gear to compatible both (B Key&B+M Key) SSD, if your SATA SSD has two slots, one slot will be left in blank. It will not effect the function. It does NOT support NVME PCI-E based M key and M+B key SSD.

Attention: If your SSD size is 22*80mm, please press down the plastic lock catch A and B, so it will not push up the SSD, and will never make it bend.Please read our User Manual carefully.

Easy Installation

Easy installation,no driver required,no additional power required; Supports Plug & Play and Hot-Swapping.

For the brand new SSD, it may not be found, pls format it under disk management before the first time using.

Attention:Not compatible with MacBook original SSD

Fashion Design

Adopts aluminum alloy shell, Slim design, durable and excellent heat dissipation, be portable and easy to carry.

High Speed Data Transmission

USB 3.1 Type-C super fast, Data transfer rate up to 5Gbps for USB 3.1 Gen 1;

We tested our enclosure with SATA SSD, the actual speed can reach to 400MB/s~450MB/s on R/W.

Multi OS Compatible

Windows 7 or above, Mac OS 10.10.5 or above, Linux, and Type C Android Phones. ( Attention: Type C to C cable is not included, included an USB 3.0 AM to Type-C Cable)

Package Included
  • 1 x M.2 NGFF SSD to USB 3.1 Type-C SSD Enclosure 
  • 1 x USB 3.0 AM to Type-C M Cable (60cm) 
  • 1 x Screw Set 
  • 1 x Screw Driver 
  • 1 x Type-c adapter 
Note

1. It requires 1 screws to assemble the enclosure.When insert the SSD to house casing, as it is shrapnel design, If your ssd size is 22*80mm, please press down the plastic lock catch A and B, so it will not push up the SSD,and will never make it bend.On the other hand, please gently press the plastic lock catch C back to make it Chucking your SSD.

2.Dose not support the NVMe SSD, it only supports SATA-based M.2/NGFF(B Key&B+M Key) SSD 2242 2260 2280mm solid state drivers. If need NVME PCIE based SSD Enclosure, pls purchase another model HE-C325 from our Store. SSK M.2 SATA SSD Enclosure connector only has one gear which can suitable for both (B Key&B+M Key) SSD.

3. It is also not compatible with MacBook original SSD.

4. After installed, when the first time to use the new SSD, it may not be found, please partition and format it first under disk management. If want to work on both Mac and Windows OS, please format it to EXFAT.