Introduction:

This Non standard active PoE injector is a simple and convenient power supply equipment for PoE or Non PoE devices via only an Ethernet cable, which will save your trouble about power line cabling and save cost. This PoE injector is compatible with all IEEE802.3af network devices, while it does not have auto detection function and directly supply power to the network devices by force as soon as you connect them, so you must be sure that powered devices conform to standard IEEE 802.3af in order to protect them from burning, at the same time pls be sure that your powered device support  poe pin 4/5(+),7/8(-) midspan.

Recommend: Use 568B cable for connection.

Effective Distance: 10-30Meters

Features: 

1. Power Output

Rated voltage:

Rated current: 0.5A

Current range: 0~0.5A

Ripple: 480mVp-p

Rated power: 24W

Voltage tolerance: ±3.0%

Setup, rising time: 500ms, 50ms at full load

Hold up time: >5ms at full load

Power pin: 4&5(+), 7&8(-); Data Pin: 1236

2. Power Input

Rated Voltage range: 100~240VAC

Frequency range: 47~63Hz

Efficiency: >80% (min)

AC current: 0.7A(max)

Leakage current: < 0.25 mA @ 250 V

Inrush current: < 40 A @ 230 V 

3. Power Protection

Protection Short circuit: Yes

Over load protection: Yes

Over power protection: Yes

4. Environment

Working temp: 0 ~+40°C

Working humidity: 20 ~90% RH non-condensing

Storage temp & humidity: -20~+85°C, 10~95% RH

Vibration: EN 61131-2

5. Safety & EMC

Standards: design refer to EN60950

Withstand voltage: I/P-O/P: 3KVAC, 5mA, 60S

EMC: EN55022 Class B

6. Others