1.The USB PCIE card can be easily upgraded to 2x USB C and 2x USB A ports by inserting it into the PCIE x1 slot of your computer.The card also comes with an external 19-pin connector and a USB 20-pin Type E port inside that can be flexibly extended to the front panel of the computer as needed without the need for an additional power supply, thus solving the problem of fewer USB ports on the host computer.To help address your unique requirements and enable hassle-free setup on any computer, we additionally equip a standard PC chassis 12 cm bracket (installed) and a small tower chassis 8 cm short bracket
2.The card offers theoretical data transfer speeds of up to 5Gbps bandwidth,which is 10x faster than USB 2.0.Ideal for file backup,video editing and data recovery. Note: Actual transfer speeds may be limited by the connected device - USB-C ports aren't compatible with the Thunderbolt protocol
3.Compatible with PCIe 3.0 and PCIe 2.0 motherboards for PCI Express x1, x4, x8, x16 slots. Operating system support for Windows XP/Vista/2008 Server/7/8/10 and Linux Mint, Ubuntu 20.04. (Mac isn't supported.) Note: Driver installation is required for Windows XP,Vista/7, Server,not required for Windows 10 .If there are compatibility issues/not working, let me konw
4.The internal circuitry has four power supply modules,which eliminate the need for an additional power adapter for installation.the PCIe USB card draws power directly from the PCI-E slots inside the motherboard. Each connector is individually fused with ligent overcurrent and short-circuit protection to protect your computer equipment
5.When installing,note that since the pcie card USB port is vertical, first insert the USB flash drive/USB cable into the card's USB slot to seat it.Then tighten the screws,close the PC case cover, turn on the PC and install the driver. For the narrow slot area at the rear of the PC mainframe, simply cut one of the slot's crossbars with small sheet metal hand pliers
2.The card offers theoretical data transfer speeds of up to 5Gbps bandwidth,which is 10x faster than USB 2.0.Ideal for file backup,video editing and data recovery. Note: Actual transfer speeds may be limited by the connected device - USB-C ports aren't compatible with the Thunderbolt protocol
3.Compatible with PCIe 3.0 and PCIe 2.0 motherboards for PCI Express x1, x4, x8, x16 slots. Operating system support for Windows XP/Vista/2008 Server/7/8/10 and Linux Mint, Ubuntu 20.04. (Mac isn't supported.) Note: Driver installation is required for Windows XP,Vista/7, Server,not required for Windows 10 .If there are compatibility issues/not working, let me konw
4.The internal circuitry has four power supply modules,which eliminate the need for an additional power adapter for installation.the PCIe USB card draws power directly from the PCI-E slots inside the motherboard. Each connector is individually fused with ligent overcurrent and short-circuit protection to protect your computer equipment
5.When installing,note that since the pcie card USB port is vertical, first insert the USB flash drive/USB cable into the card's USB slot to seat it.Then tighten the screws,close the PC case cover, turn on the PC and install the driver. For the narrow slot area at the rear of the PC mainframe, simply cut one of the slot's crossbars with small sheet metal hand pliers
