Introduction5 inch Capacitive Touch Display for Raspberry Pi, 800 x 480, TFT Wide Angle, MIPI DSI InterfaceFeatures5 inch TFT screen. 800 x 480 hardware resolutionCapacitive touch panel, support 5-point touchSupports Pi 4B/3B+/3A+/3B/2B/B+/A+. Another adapter board is required for CM3/3+. DSI interface, refresh rate up to 60Hz. Supports Raspbian/Ubuntu/Kali and WIN 10 IoT, driver-free. Working With Raspberry PiHardware connection. Connect the DSI interface of 5 inch DSI LCD to the DSI interface of Raspberry Pi. For easy use, you can fix the Raspberry Pi on the backside of the 5inch DSI LCD by screws.
Software setting1) Download image (Raspbian, Ubuntu, Kali, or WIN10 IOT) from the Raspberry Pi website. 2) Download the compressed file to the PC, and unzip it to get the. img file. 3) Connect the TF card to the PC, use SDFormatter. exe software to format the TF card. 4) Open the Win32DiskImager. exe software, select the system image downloaded in step 2, and click'Write' to write the system image. 5) After the image has finished writing, save, and quit the TF card safely.
6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.
Note: When adjustable brightness via software, if the command reports the 'Permission denied' error, please switch to the 'root' user mode and execute it again. Package Content1 x 5 inch DSI LCD. 1x FPC 15PIN 1.0 pitch 50mm (opposite sides). 1 x screws.
Development Resourceshttps: //www. waveshare. com/wiki/5inch_DSI_LCD?
Software setting1) Download image (Raspbian, Ubuntu, Kali, or WIN10 IOT) from the Raspberry Pi website. 2) Download the compressed file to the PC, and unzip it to get the. img file. 3) Connect the TF card to the PC, use SDFormatter. exe software to format the TF card. 4) Open the Win32DiskImager. exe software, select the system image downloaded in step 2, and click'Write' to write the system image. 5) After the image has finished writing, save, and quit the TF card safely.
6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts.
Note: When adjustable brightness via software, if the command reports the 'Permission denied' error, please switch to the 'root' user mode and execute it again. Package Content1 x 5 inch DSI LCD. 1x FPC 15PIN 1.0 pitch 50mm (opposite sides). 1 x screws.
Development Resourceshttps: //www. waveshare. com/wiki/5inch_DSI_LCD?
