OCP NIC 3.0 Small Form Factor
PCI-Express host interface specification v2.1, PCI-Express lanes: x4
Complies with PCI Bus Power Management Interface Specification Rev1.2
Complies with dual port 1GbE RJ45 port
Operate Speeds: 1000/100/10 Mbps
Halogen-free dual- or quad-port Gigabit Ethernet adapters with copper or fiber interface options
Innovative power management features including Energy Efficient Ethernet (EEE) and DMA Coalescingfor increased efficiency and reduced power consumption
Flexible I/O virtualization for port partitioning and quality of service (QoS) of up to 32 virtual ports
Scalable iSCSI performance delivering cost-effective SAN connectivity
Reliable and proven Gigabit Ethernet technology from Intel Corporation
Controller Intel NHI350AM4
Transmission Medium Copper UTP
Cable Type 1000Base-T Cat 5E / Cat6 Or Higher:Up to 100m
100Base-Tx Cat5/Cat 5E/ Cat6 Or Higher:Up to 100m
10Base-T Category 3/4/5/5E/6 Or Higher:Up to 100m
Bracket OCP 3.0
Power Dissipation (MAX) W
System requirements Windows 7/8/8.1/10/ XP/ Vista
Windows Server 2003 /2008 /R2/2012 /R2/2016 /R2
Novell Netware 5.x/6.x or later
Linux kernel version 2.4.x/2.6.x/3.x/4.x or later
FreeBSD 7/8/9 or later
Sun Solaris 9/10/11 or later
VMware ESX/ESXi 4.x/5.x/6.x or later
Connector 4 x RJ45 Copper
Bus PCI Express v2.1 ( 5.0GT/s) x4, Compatible with PCIe x8 or x16
Data Rate Per Port 10Mbps/100Mbps/1000Mbps
Technical Parameters
Ethernet power management Yes
IEEE* 802.3 adaptive Yes
Support adaptation rate 10BASE-T, 100BASE-TX, 1000BASE-T
IEEE Standard / Network topology IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3u 100base-TX,IEEE 802.3 az,IEEE 802.1Q VLAN
IEEE 802.1ad
PCI-SIG * SR-IOV Support Yes
Jumbo frame Support Yes
VMDq Yes
DPDK Support Yes
PXE Support Yes
iSCSI Support Yes
WOL Support Yes
FCoE Support No
Environmental Parameters
Operating Temperature 0 to 55 (32 to 131 )
Storage Temperature -40 to 70 (-40 to 158 )
Storage humidity 35% to 90%, non condensing
LED Indicators
LED Indicators 1000Mbps:Link Yellow+ Green blinking
Package content
1 x I350-T4 for OCP3.0 Quad- 1G Copper Ethernet adapter
1 x Users Manual
1 x CD Driver
System Requirements
FreeBSD, Linux , VMWare ESXi, Win7/ Win-server2012/ Win-server2008/ Win8/Win8.1/Win-server2016/win10
An available OCP3.0 SFF slot
Cabling Requirements:
Intel 1 Gigabit adapters
For 1000BASE-T OR 100BASE-TX.use Category 5 or Category5e wiring, twisted 4-pair copper:
Make sure you use Category 5 cabling that complies with the TIA-568 wiring specification For more information on this specification.
Length is 100 meters max.
Category 3 wiring supports only 10Mbps
CAUTION: If using less than 4-pair cabling, you must manually configure the speed and duplex setting of the adapter and the link partner. In addition,with2-and3-pair cabling the adapter can only achieve speeds of up to 100Mbps
For 100BASE-TX.use Category 5 wiring.
For10BASE-T.use Category 3 or 5wiring
Hardware installation
1.Turn off the computer and unplug the power cord
2.Remove the computer cover and the adapter slot cover from the slot that matches your adapter
3.Insert the adapter edge connector into the slot and secure the bracket to the chassis
4.Replace the computer cover ,then plug in the power cord
5.Power on the computer
Install Drivers and software
Windows Operating Systems
You must have administrative rights to the operating system to install the drivers.
1.insert the CD driver bound with Intel network driver into your CD-ROM drive(also you can download the latest drivers from support website):
2.if the Found New Hardware Wizard screen is displayed, click Cancel
3.start the autorun located in the software package, the autorun may automatically start after you have extracted files.
4.Click install Drivers and Software
5.Follow the instructions in the install wizard to finish it
Installing Linux Drivers from Source Code
1.Download and expand the base driver tar file.
2.Compile the driver module
3.Install the module using the modprobe command
4.Assign an IP address using the ifconfig command
Support
More information and settings, please refer to the Intel Adapter User Guides or you can contact us.
