Integrated 1000Mbps-SX/LX transceiver

Supports USB3.0,USB2.0 and USB1.1

Supports CDC-ECM

Supports LPM(Link Power Management)

Supports Pair swap/polarity/skew correction

Crossover Detection &Auto-Correction

Transmit/Receive on-chip buffer support

Supports hardware CRC(Cyclic Redundancy Check) function

Supports power down/link down power saving

Upstream port: USB3.0 AF

Downstream port: SFP port

Chipset:RTL8153/Realtek






Package content

1 x USB3.0 Gigabit SFP Network Adapter

1 x Users Manual

1 x CD

Accessories


System Requirements

Linux, MAC OS10.6~10.13,Windows XP/Vista/Win7/Win8/Win8.1/Win10 32bit or 64 bit

Available USB3.0 port


Hardware installation

1.Turn on the computer and get it into the system

2.Plug the USB3.0 adapter into your computers USB port

3.Insert the SFP optical fiber module into the SFP port

Install Drivers

Windows Operating Systems

For Windows XP/Vista/Win7/Win8/Win8.1/Win10

Only need plug the USB3.0 SFP adapter into your computers USB port, at the same time the computer system will recognize a new drive disk, Double-click the drive disk, and the system will start and finish the driver installation automatically(if the driver does not installed, please right-click open to Brower drive disk file, and double-click RTK_NIC_DRIVER_INSTALLER,sfx.exe). The drive disk will disappear after the driver is installed successfully.




*If the driver still installed failure, please follow below process to complete install:

1.Pls take out the CD from the package and place it in the computer CD drive.

2.Find the driver file corresponding to the system.

3.Double-click Setup.exe to start the program installation.

4.Follow the steps in the program until the last one, and restart the computer.

To Verify Windows® Driver Installation

Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. If you has installed successfully, you should see Realtek USB GbE Family Controllerinstalled under Network Adapter item.