Built-in 4-pin power connector for receiving extra power supply from system
Hot-swapping feature allows you to connect/disconnect devices without powering down the system
Support Windows® XP/Vista/7 (32/64 bit)win8.win8.1.win10.win11
System Requirements
Windows® XP/Vista/7 (32/64 bit)win8.win8.1.win10.win11
One available PCI Express slot (Recommend PCI Express 2.0)
Package Contents
1 x USB 3.0 2-Port PCI Express Card
1 x Driver CD
1 x User Manual
Note: Contents may vary depending on country/market.
Hardware Description
1External USB3.0*2Port
2low profile bracket
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computers cover.
3. Remove the slot bracket from an available PCIe slot.
4. To install the card, carefully align the cards bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
5. Replace the slot brackets holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® XP/Vista/Win7 (32/64 bit)
1. Please insert the CD driver bound with USB 3.0 2-Port PCI Express Card into your CD-ROM Drive.
2. At the Windows desktop, click Start, Run.
3. Type D:\NEC uPD720200\Setup.exe, click OK. (Change D: to match your CD-ROM drive letter)
4. Follow the on-screen instructions to complete the installation.
To Verify Driver Installation
Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. You should see a NEC Electronics USB 3.0 Host Controller and a NEC Electronics USB 3.0 Root Hub under the Universal Serial Bus controllers item
