Support PCI Express Gen-II x4 up to 20Gbps bus bandwidth

PCI Express interface: X4

Compliant with PCI Express Base2.0 Specification

Compliant with PCI Express card Electromechanical 2.0 specification

Compliant with Universal Serial Bus 3.0 Specification Revision1.0

Compliant with eXtensible Host Controller Interface specification Revision 1.0

Compliant with USB Attached SCSI Protocol Revision 1.0

Support USB SuperSpeed(5Gbps),HighSpeed(480Mbps) , FullSpeed(12Mbps),and LowSpeed(1.5Mbps) transmission

Integrated Spread Spectrum controller for usb3.0 interface

Support the charge function of USB Battery Charge for portable devices.

USB-IF battery Charge Revision 1.2 compliant

Support four USB3.0 Type A Port and two USB3.0 19PIN front ports

Each port transmission speeds up to USB3.0 GENI 5Gbps

Built-in Power Supply ,Maximum current 5V/900mA each port

Support legacy device and wakeup event

Support proprietary driver for Windows7,and in box driver for Windows8,Window8.1, Server2012 and Windows 10

Support various Linux kernels

Chipset: ASM1042A&PI7C9X2G608P

Package content

1 x PCIe ASM1042A 8-Ports USB3.0 Card

1 x Users Manual

1 x CD

Accessories

System Requirements

Various Linux kernel2.6.31 and later OS in-box USB driver natively support UASP, no additional driver required

Mac 10.8 to 10.10 ,Mac12.12 and later

Windows Operation Systems: WinXP/Win7/Win8/Win8.1/Server2012/Win10 32bit or 64 bit

An available PCI-Express x4/x8/x16 slot

Hardware Description















Hardware installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computers cover.

3. Remove the slot bracket from an available PCIe x4/x8/X16 slot.

4. To install the card, carefully align the cards bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.

5. plug the 15PIN SATA power cable into power jack

5. Replace the slot brackets holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Install Drivers

Windows Operating Systems

For Windows XP/7 32 or 64bit

Please insert the CD driver bound with PCIe USB3.0 Card into your CD-ROM Drive.

At the Windows desktop, click Computer Double click CD-ROM Drive to Brower drivers files:

Type: D: \ USB3.1 ASM1042 \Setup.exe, click OK. (Change D: to match your CD-ROM drive letter)

Follow the on-screen instruction to complete the installation

For Win8, Win8.1, Win SERVER2012 ,Win10 32 or 64bit

Using in Windows box driver for Win8, Win8.1 and Win10 to complete install the drivers


To Verify Windows® Driver Installation

Click on the Device Manager tab in System Properties, which you access from the Windows Control Panel. If you has installed successfully, you should see ASMedia xHCI Host controllerinstalled under Universal Serial Bus Controllers item.

Support

More information and settings please refer to the User Guides or you can contact us.