Fully compliant with PCI Express Base Specification Revision 2.0

2-lane (x2) PCI Express throughput rates up to 10Gbps

compliant with Intels extensible Host controller interface (xHCI) Specification 1.0

supports PCI Bus Power Management Interface Specification Revision1.2

Compliant with Universal Serial Bus 3.0 specification Revision 1.0

Supports simultaneous operation of multiple USB 3.0, USB 2.0 and USB 1.1 devices Supports the following speed data rates as follows: Low-speed (1.5Mbps) / Full-speed (12Mbps) / High-speed (480Mbps) / Super-speed (5Gbps)

Supports 4 internal and 4 external USB3.0 ports for all speeds

Each USB3.0 port transmitting speeds up to 5Gbps

Each usb3.0 port with max 5V/900MA power supply.

Supports USB Attached SCSI Protocol(UASP) mode

Built-in SATA power connector for receiving extra power supply from system

Hot-swapping feature allows you to connect/disconnect devices without powering down the system

Support Windows® XP/Vista/7/8/8.1/10/11(32/64 bit),Linux

Chipsets: D720201&ASM2806


Package content

1 x PCIe x4 NEC720201 8-USB3.0 card

1 x Users Manual

1 x Low profile bracket

1 x Driver CD

Accessories

Hardware installation

1. Turn Off the power to your computer.

2. Unplug the power cord and remove your computers cover.

3. Remove the slot bracket from an available PCIe x4/x8/x16 slot.

4. To install the card, carefully align the cards bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.

5. Replace the slot brackets holding screw to secure the card.

6. Replace the computer cover and reconnect the power cord.

Install Drivers

For Windows XP/Vista/Win7 (32 or 64bit)

1. Please insert the CD driver bound with USB3.0 card into your CD-ROM Drive.

2. At the Windows desktop, click Start, Run.

3. Type D:\ USB3.0 NEC D720201-202\EXE \Setup.exe, click OK. (Change D: to match your CD-ROM drive letter)

4. Follow the on-screen instructions to complete the installation.

For Windows 8/8.1/10/11 (32 or 64bit)

No need drivers, just using the windows box driver to automatic finish installation

Support

More information and settings, please refer to the Adapter User Guides or you can contact us.