PrimoChill takes pride in providing solutions, and PC Ice is the solution to your water cooling fluid dilemma. If you are looking for an affordable and efficient solution as well as a peace of mind, the ONLY solution is PC Ice. Compatibility Do not mix ANY additional additives, other fluids or silver coils. This will change the formulation causing undesirable results. Ok to use with all rubber gaskets, acrylic tubing, pvc tubing, petg tubing, glass tubing, as well as nickel and copper components. Parts Included 1x 32oz Bottle PrimoChill ICE Warnings Low-ConductivityAs with all Low-Conductive fluids, PC ICE can become conductive if it comes in contact with excessive dust or other fluids that may be conductive.
The Low-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system.
Recommend: Pre-treat your system with Sys Prep (sold separately) to achieve a clean loop and to ensure optimal non-conductive results. Maintenance As with all custom loop water-cooling, continual maintenance and frequent inspection is required. ICE will need to be replaced every 6 months, depending on the complexity and conditions of your loop this time frame may vary. Compatibility Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. StainingProlonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components. High Pressure Systems The combination of high pressure loops and micro-channel water blocks will accelerate the breakdown of fluid. We STRONGLY recommend using a pressure relief valve (sold separately) in every water-cooling loop. Not responsible for any hardware damage. Use at your own risk.
The Low-Conductive aspect of PC Ice is used as a safety measure only. It is always a good idea to keep your system clean and free of dust, especially in a water cooled system.
Recommend: Pre-treat your system with Sys Prep (sold separately) to achieve a clean loop and to ensure optimal non-conductive results. Maintenance As with all custom loop water-cooling, continual maintenance and frequent inspection is required. ICE will need to be replaced every 6 months, depending on the complexity and conditions of your loop this time frame may vary. Compatibility Use of this product with aluminum components (such as aluminum constructed radiators) is STRONGLY DISCOURAGED and will void the fluid warranty. StainingProlonged use will cause permanent staining of your components. Severity of staining will be based on the color. Use of this product is at your own risk. PrimoChill will not replace stained components. High Pressure Systems The combination of high pressure loops and micro-channel water blocks will accelerate the breakdown of fluid. We STRONGLY recommend using a pressure relief valve (sold separately) in every water-cooling loop. Not responsible for any hardware damage. Use at your own risk.
