AoQhir PH815SJ M. 2 SATA NGFF to USB A + USB C Dual-Header Adapter Board 6Gbps, External SSD Converter for B+MKey / B-Key 2242 SATA SSD, No Driver Required, for PC Laptop Phone Product Description Turn Your M. 2 SATA SSD into a Pocket-Sized USB Drive The PH815SJ is a minimalist adapter board that transforms a bare M. 2 SATA 2242 SSD into a high-speed external drive with both USB A and USB C ports built right on the board. No enclosure, no cables just plug your SSD into the board, then plug the board directly into any USB port.
Who Is This For? Repurposing a leftover 2242 SATA SSD from an old laptop or tablet Testing or flashing SSDs without installing them internally Quick data transfer between a PC and an Android phone (requires OTG) A low-cost, ultra-portable external SSD for backups or bootable drives Important
Compatibility Check: This board ONLY works with M. 2 SATA (NGFF) SSDs using B+M Key or B-Key edge connectors. It DOES NOT work with NVMe (PCIe) SSDs, which typically have a single M-Key notch.
Supported SSD length: 2242 (42mm). Not compatible with 2230, 2260, or 2280 drives. Dual-Interface Freedom USB A side Connect to standard desktop and laptop USB ports. USB C side Connect to modern laptops, tablets, and phones (check that your Android device supports USB OTG). No more hunting for the right cable both options are on the same tiny board. Stable Electronics, Clean Power The board includes a dedicated SATA-to-USB bridge chip plus filtering capacitors and a voltage regulator circuit. The visible 1R5 inductor helps smooth power delivery, so your SSD runs reliably even during large file transfers or sustained reads/writes.
Technical
Model: PH815SJ
Host Interface: USB A 3.2 Gen 1 + USB C 3.2 Gen 1 (5Gbps)
Drive Side: M. 2 SATA (B+M Key or B-Key), 2242 length
Dimensions: 83mm × 24mm
Weight: 11.8 g (bare board)
Pro Tip: For mobile use, consider adding a thin piece of non-conductive padding or a DIY heat shrink sleeve to protect the exposed board from shorts when tossed into a bag.
Who Is This For? Repurposing a leftover 2242 SATA SSD from an old laptop or tablet Testing or flashing SSDs without installing them internally Quick data transfer between a PC and an Android phone (requires OTG) A low-cost, ultra-portable external SSD for backups or bootable drives Important
Compatibility Check: This board ONLY works with M. 2 SATA (NGFF) SSDs using B+M Key or B-Key edge connectors. It DOES NOT work with NVMe (PCIe) SSDs, which typically have a single M-Key notch.
Supported SSD length: 2242 (42mm). Not compatible with 2230, 2260, or 2280 drives. Dual-Interface Freedom USB A side Connect to standard desktop and laptop USB ports. USB C side Connect to modern laptops, tablets, and phones (check that your Android device supports USB OTG). No more hunting for the right cable both options are on the same tiny board. Stable Electronics, Clean Power The board includes a dedicated SATA-to-USB bridge chip plus filtering capacitors and a voltage regulator circuit. The visible 1R5 inductor helps smooth power delivery, so your SSD runs reliably even during large file transfers or sustained reads/writes.
Technical
Specifications
:Model: PH815SJ
Host Interface: USB A 3.2 Gen 1 + USB C 3.2 Gen 1 (5Gbps)
Drive Side: M. 2 SATA (B+M Key or B-Key), 2242 length
Dimensions: 83mm × 24mm
Weight: 11.8 g (bare board)
Pro Tip: For mobile use, consider adding a thin piece of non-conductive padding or a DIY heat shrink sleeve to protect the exposed board from shorts when tossed into a bag.
