
Quick View
Audio Technica AT-HS6 Universal 1/2" Mount Headshell (Black)- Brand: Audio-Technica
- Color: Black
- Feature: Universal 1/2"-mount headshell for 4-pin turntable cartridges
Ultra-lightweight aluminum die-cast body keeps vibration to the bare minimum
Finger lift enables precise stylus placement
Equipped with color-coded lead wires
Includes mounting screws
- Model #: AT-HS6BK

Quick View
Audio Technica AT-VM510xCB Dual Moving Magnet Phono Cartridge Conical Stylus Blue/Black- Brand: Audio-Technica
- Color: Blue/Black
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Channel Separation: 24 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 5.0 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.5 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM510XCB

Quick View
Audio Technica AT-VMN10xCB Bonded Conical VMx Replacement Stylus, Blue- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Feature: The AT-VMx series brings new warmth and realism to Audio-Technica's premium dual moving magnet (MM) cartridge line, delivering an expansive soundstage that's alive with musical detail.
Aligning with our founder's belief that high-quality audio should be accessible to all, the AT-VMx Series is unmatched in delivering a truly affordable high-fidelity audio experience.
- Model #: AT-VMN10XCB

Quick View
Audio Technica AT628A Premium Disk Stabilizer - Stainless Steel (Sliver)- Brand: Audio-Technica
- Color: Silver
- Feature: Precision-machined stainless-steel stabilizer holds records firmly in place for reduced resonance and improved sound quality
Two recessed inner rings on the underside of the stabilizer accommodate records that bulge slightly near the spindle hole
Easy to grip with fingers
Approx. 450 g (15.9 oz)
Fits spindles up to 21 mm long
Works with a wide variety of turntables, including most Audio-Technica step-up and premium models*
Made in Japan
*Check with your turntable's manufacturer to confirm that it can support the weight of the AT628a. The AT628a should not be used with the following Audio-Technica turntables: AT-LP3XBT, AT-LPW30, and all entry-level models, including the Sound Burger and turntables in the AT-LP60, AT-LP60X and AT-LP70X Series. Please reach out to our Audio Solutions T...
- Model #: AT628A

Quick View
Yamaha TT-N503WH MusicCast VINYL 500 Wi-Fi Turntable - White- Series: MusicCast VINYL 500
- Type: Turntable
- Color: White
- Inputs: Network Section
File Format: MP3 / WMA / MPEG-4 AAC: up to 48 kHz / 16-bit, ALAC: up to 96 kHz / 24-bit, FLAC / WAV / AIFF: up to 192 kHz / 24-bit, DSD: up to 11.2 MHz
Ethernet: Yes
Wi-Fi: Yes (2.4 / 5 GHz)
AirPlay: Yes
Bluetooth Section
Version/Profile: Ver. 4.2 / A2DP, AVRCP
Audio Codec: SBC, AAC
Maximum Communication Range: 10 m / 32.8 ft. 10 in. (without interferene)
Turntable
Drive Method: Belt drive
Motor: DC motor
Wow And Flutter: 0.2%
Platter: Aluminium die-cast (Diameter 30 cm)
Output Level: 450 mV (-7 dBV, with RIAA EQ, 1 kHz, 3.54 cm / sec), 2.5 mV ± 3 dBV (without RIAA EQ, 1 kHz, 3.54 cm / sec)
Signal To Noise Ratio: 67 dB or higher (A-weighted, 20 kHz, LPF)
Tonearm
Tonearm: Static balance straight tonearm
Effective Arm Length: 223.5 mm
Overhang: 19 mm
Stylus Pr...
- Model #: TT-N503WH

Quick View
Audio Technica AT-VM670xSP 78 RPM Monaural Dual Moving Magnet Phono Cartridge with Bonded Conical Stylus Grey- Brand: Audio-Technica
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 20,000 Hz
Vertical Tracking Angle: 20°
Tracking Force: 4.5 to 5.5 g (5.0 g standard)
Stylus Construction: Conical bonded (3.0 mil)
Recommended Load Impedance: 47 k ohms
Coil Impedance: 1.6 k ohms (1 kHz)
DC Resistance: 375 ohms
Coil Inductance: 240 mH (1 kHz)
Output Voltage: 4.7 mV (1 kHz, 5 cm/sec.)
Horizontal/Vertical Output Ratio: 20 dB (1 kHz)
Cantilever: Aluminum pipe
Static Compliance: 23 x 10-6 cm/dyne
- Feature: AT-VMx dual moving magnet cartridge with 3.0 mil conical bonded stylus
3.0 mil conical bonded stylus designed for playing 78 RPM records
Paratoroidal coils improve generating efficiency for enhanced transient response
PCUHD (Pure Copper Ultra High Drawability) coils - and fewer coil turns - deliver highly res...
- Model #: AT-VM670XSP

Quick View
Audio Technica AT-VM750xSH Dual Moving Magnet Phono Cartridge with Nude Shibata Stylus Brown/Gold- Brand: Audio-Technica
- Color: Black/Gold
- Accessory Type: Cartridges & Needles
- Specification: Frequency Response: 20 to 27,000 Hz
Channel Separation: 26 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude Shibata
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.7 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.0 dB (1 kHz)
Cantilever: 0.28 mm (0.01") diameter solid boron
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 7 x 10-6 cm/dyne (100 Hz)
- Model #: AT-VM750XSH

Quick View
Audio-Technica ATXP5 DJ Cartridge- Specification: Channel Separation: 20 (dB at 1 kHz)
Vertical Tracking Force: 2.0-4.0 g (3.0 g standard)
Stylus Construction: Bonded round shank
Recommended Load Impedance: 47,000 ohms
Output: 5.5 mV (1 kHz, 5 cm/sec.)
Channel Balance: 2.0 dB (1 kHz)
Stylus Shape: 0.3 x 0.7 mil elliptical
Cantilever: Carbon fiber-reinforced ABS
Mount: Half-inch
Replacement Stylus: ATN-XP5
Coil impedance: 6.7 k ohms (1 kHz)
DC resistance: 990 ohms
Recommended load capacitance: 100 to 200 pF
Coil inductance: 1.0 H (1 kHz)
Vertical tracking angle: 20 degree
- Frequency Response: 20-18,000 Hz
- Dimension: 0.68" x 0.67" x 1.20"
- Weight: 0.22 oz.
- Model #: ATXP5

Quick View
Audio Technica AT-CAP1 Cartridge Alignment Protractor (Black)- Brand: Audio-Technica
- Color: Black
- Accessory Type: Cartridge Alignment Protractor
- Feature: Protractor uses the common Baerwald alignment method to set a phono cartridge's offset angle and null points
Proper alignment is critical for peak cartridge performance, providing optimal tracking and minimizing distortion
Suitable for tonearms with an effective length between 222 mm (8.7") and 250 mm (9.8")
- Model #: AT-CAP1