TRIPP LITE SMART2500XLHG 2200VA 1920-WATTS SMART TOWER HOSPITAL MEDICAL USB UPS
Learn more about the Tripp Lite SMART2500XLHG
Model
Brand
TRIPP LITE
Series
SmartPro
Model
SMART2500XLHG
Input
Input Voltage Range
120 V AC
Input Connection
C20 inlet
Output
VA Rating
2200VA
Watts
1920W
Output Voltage
115V; 120V
Output Frequency
60 Hz
Outlets
8
Outlet Type
4 5-15/20R outlet(s); 4 C13 outlet(s)
Battery
Battery Run Time
Full Load Runtime: 4.4 minutes
Half Load Runtime: 13 minutes
Battery Recharge Time
4.5 hours MAX (10% to 90% capacity) Internal batteries only
Battery Replaceable
RBC48V-HGTWR
Details
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Interface Port
USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Management Software
PowerAlert
Approvals
Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); Tested to UL60601-1 (medical grade)
Surge Protection
Surge Energy Rating
510 Joules
Features
Features
Ideal UPS protection for applications in patient-care areas where UL 60601-1 3rd edition listed medical electrical equipment is required
Built-in isolation transformer with Faraday shield offers full isolation and removes common mode noise while maintaining full AC surge suppression in all modes
Full line isolation prevents shock potential and operational problems in sensitive electronic equipment
Provides connected equipment with continuous power during short and long duration loss of commercial power
Expandable runtime is available with the addition of one or more external battery packs (BP48V24-2U and BP24V60RT-3U)
Line-interactive voltage regulation corrects brownouts and over voltages from 83 to 143V back to usable 120V output levels, without using battery power
Resistant to electrostatic discharge
Supports loads up to 2200VA/1920W
13 min half-load runtime (1100VA/960W), 4 min full load runtime (2200VA/1920W)
Input: IEC320-C20 inlet with locking clamp/ Output: 4 NEMA5-15/20R and 4 IEC C13