Search Results - Showing 1 - 11 of 11 Products
EnLabs ENU335HDD USB 3.0 to 3.5inch or 2.5 inch SATA External Hard Disk Drive Enclosure w/ ...
$37 .89
Free Shipping
- Brand: En-Labs
- Size: 2.5" & 3.5"
- Color: Black
- External Interface: SATA
- Material: Plastic
- Internal Interface: SATA I/II/III
- Model #: ENU335HDD
- Item #: 9SIV0VZ8ZD0687
- Return Policy: En Labs Marketplace Return Policy
M.2 NVME / NGFF SSD Enclosure Adapter, USB 3.2 Gen 2 (10 Gbps) to PCI-E NVME & NGFF ...
$23 .69
Free Shipping
- Compatibility: Motherboard Chipsets
- Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
- Dimensions: 100mm x 150mm x 3.0mm
- Model #: 11-001-043
- Item #: 9SIV0VZ55K1364
- Return Policy: En Labs Marketplace Return Policy
M.2 NVME / NGFF SSD Enclosure Adapter, USB 3.2 Gen 2 (10 Gbps) to PCI-E NVME & NGFF ...
$23 .39
Free Shipping
- Type: Enclosure
- Maximum Capacity (per Bay): Up to 4TB
- Model #: ENU325SSDAL
- Item #: 9SIV0VZ7VT0521
- Return Policy: En Labs Marketplace Return Policy
En-Labs ENU325SSDHTS 2.5" USB 3.0 HDD SATA External Hard Drive Disk Enclosure Case Box ...
$14 .19
Free Shipping
- Type: Enclosure
- Maximum Capacity (per Bay): Up to 1TB
- Package Contents: 1 x 2.5 inch HDD Enclosure 1 x 1.64ft USB Data Cable 1 x Screwdrive 1 x Screws package
- Model #: ENU325SSDHTS
- Item #: 9SIV0VZ7VT0408
- Return Policy: En Labs Marketplace Return Policy
EN-Labs M.2NVMe & NGFF Duplicator Cloner Docking Station Dual-Bay 20Gbps USB C to PCIe M ...
$94 .99
Free Shipping
- Compatibility: Motherboard Chipsets
- Features: Fit for raspberry Pi B+,Pi2 B,Pi 3 ,set of 3 heatsinks These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Pure copper heatsink thermal conductivity up to 401w / mk,good idear for processor,CPU and GPU cooling,Tested to fit the Raspberry Pi CPU / SoC,reduce the risk of hardware failure due to overheating. These heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: ...
- Model #: 11-001-099
- Item #: 9SIV0VZ55K1329
- Return Policy: En Labs Marketplace Return Policy
USB 3.0 Hard Drive Docking Station,OTB Function SATA IDE to USB 5Gbps Enclosure For 2.5 3.5 ...
$42 .89
Free Shipping
- Color: Black
- Material: Classic Plastic
- Type: Dock
- HDD Count Supported: Dual HDD
- Number of Bay: 3
- Model #: HDDU3DOCK-CL
- Item #: 9SIV0VZHJV0378
- Return Policy: En Labs Marketplace Return Policy
EnLabs mSATA to 2.5inch SATA Adapter Converter w/ 7mm Case Enclosure,2.5" SATA III to ...
$13 .19
Free Shipping
- Brand: En-Labs
- Color: Black
- External Interface: SATA
- Material: Aluminum
- Number of Bay: 1
- Features: Only fit for mSATA SSD,DO NOT support SATA/PATA Mini PCIE SSD, DO NOT support Apple SSD Pls check your SSD type before place order. Support mSATA SSD converted into a standard 2.5" SATA interface. ,fit for mSATA SSD 30x50mm The speed and other properties is not changed,only form conversion interface,because such transformation does not need through the integrated circuit chip. Transfer speed up to SATA III 6Gbps. Plug and play, and You can connect it to laptop or desktop,Ply and play, not extra driver is needed Compatible with Win 10 / 8 / 7 / VISTA / XP / Linux / Mac. Material:Aluminum,Thickness: 7mm,Dimension: 100x70x7mm.
- Model #: ENMSATA2SATA
- Item #: 9SIV0VZ9BM9279
- Return Policy: En Labs Marketplace Return Policy
EnLabs USB 3.1 5Gbps Type-C to M.2 NGFF (SATA) SSD Adapter Converter Enclosure for Socket ...
$21 .39
Free Shipping
- Brand: En-Labs
- Color: Black
- External Interface: USB 3.1
- Material: Aluminum
- Number of Bay: 1
- Features: Only fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit any PCI-E based B key and PCIe NVMe / PCIe AHCI NGFF M.2 SSD with Key M devices Pls check your M.2 SSD type before place order. This is a compact NGFF (M.2) SSD Enclosure which will allow you to plug in your NGFF (M.2) SSD and use it as a portable external drive at USB 3.1 Type-C super speed data transfer rate up to USB 3.1(GEN 1) 5Gbps.By formatting this case with a drawer function, there is now extra protection for your hard drive. Reverse compatible with USB 3.0/2.0 and 1.1,and the speed turn with it. this enclosure is a perfect solution for data transfer or data backup! Features Connects Socket 2 B-key M.2 NGFF SATA SSD to computer via USB port safely. Com...
- Model #: ENNGFF2U35GC
- Item #: 9SIV0VZ8ZD0990
- Return Policy: En Labs Marketplace Return Policy
NVMe to USB Hard Drive Enclosure, USB 3.1 USB C to M.2 SSD NVMe PCIe Converter Adapter ...
$27 .89
Free Shipping
- Brand: En-Labs
- Color: Silver
- External Interface: USB 3.1 Type-C
- Material: Aluminum
- Internal Interface: M.2 NVME M-Key
- HDD Count Supported: Single SSD
- Model #: UC10GNVMESL
- Item #: 9SIV0VZAPD9302
- Return Policy: En Labs Marketplace Return Policy
EnLabs USB-C to 2.5" SATA III Hard Drive Adapter Cable – SATA to USB Type-C 5Gbps ...
$15 .79
Free Shipping
- Package Contents: USB to SATA Adapter
- Model #: U35GC2SATA
- Item #: 9SIV0VZ8ZD0965
- Return Policy: En Labs Marketplace Return Policy
EnLabs ENM22SATA3 NGFF M.2 SSD to 2.5" SATA III Converter Adapter with 7mm Enclosure, ...
$14 .09
Free Shipping
- Material: Metal
- Type: Enclosure
- Model #: ENM22SATA3
- Item #: 9SIV0VZ7VT0474
- Return Policy: En Labs Marketplace Return Policy
