Featured Products See All
MSI MAG Coreliquid A13 360 White - AIO ARGB Liquid Cooling - 360mm Radiator - Triple ...
$79 .99
Free Shipping
- Minimalist Design: Embracing the philosophy of simplicity, with clean lines that embody the essence of "less is more. “
- Ring Blade Design: Focuses airflow and
- reduces noise.
- The fan design uses Rifle bearings, which effectively reduce fan noise and increase operational lifespan.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Easy installation: Pre-installed Intel Bracket (1700/1851)
$79 .99
DIYPC IDX5-BK-ARGB Black Dual USB3.0/Type C Tempered Glass ATX Gaming Computer ...
Save: $55.05 (39%)
$84 .94
Free Shipping
- DIYPC IDX5-BK-ARGB is a panoramic ATX case with a 270° full view of your masterpiece for building high-performance system.
- Motherboard Compatibility: Supports E-ATX, ATX, Micro ATX, and ITX motherboards, support BTF back plug-in MB
- 9 Fans Capability (3 x 120mm ARGB Reverse Blade PWM Fan x MB side, 1 x 120mm ARGB PWM Fan x rear pre-installed) Provide Great Cooling and Gaming Performance
- Integrated ARGB Lighting Bar (Pre-Installed)
- Water Cooling Ready – Top Support 360mm Radiator
- 2 Ways to Control RGB Fan Lighting: Either by Manual RGB LED Button on Top I/O Panel; or SYNC w/your Motherboard to control RGB lighting w/ARGB 5V/3 Pin Header. PWM ARGB Fan Hub Included
- Advanced Cable Management Design – Routing the main cable is easy and quick through a hidden channel.
- It supports up to 220mm long full ATX power supply to run the most power hungry system.
- Support up to 440mm VGA card
- Support up to 180mm CPU cooler
Save: $55.05 (39%)
$84 .94
LIAN LI O11 Vision Black Aluminum / Steel / Tempered Glass ATX Mid Tower Computer Case ...
Save: $35.00 (23%)
$114 .99
Free Shipping
- Cooperation with PC Master Race (PCMR), one of big PC communities. Three sides of column-less glass panels for the most seamless view of components, and top and side panels are equipped tool-less removable design.
Save: $35.00 (23%)
$114 .99
DIYPC DIY-ATX08-Wood Black USB3.0 /Type C ATX Mid Tower Gaming Computer Case w/ ...
Save: $25.07 (25%)
$74 .92
Free Shipping
+ $5 off w/ promo code BSBVF27, limited offer
- DIY-ATX08-Wood front panel is crafted with high quality walnut wood. The natural and elegant wood element is perfectly integrated into the modern workspace.
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboards
- It has side tempered glass panel, w/top mesh design allows optimized air flow.
- Crafted from steel, tempered glass and wood to blend into any home design.
- The DIY-ATX08-Wood has bigger interior space to accommodate and improve cooling performance
- 12 Fans Capability (4 x 120mm PWM Fans pre-installed: 3 x front and 1 x rear) provide great cooling
- Bottom mounted IO ports - 2x USB 3.0 and 1 x Type C for up-to-date High speed data transfer
- Water cooling ready – top support up to 360mm radiator
- Support up to 420mm x GPU
- Support up to 174mm CPU
Save: $25.07 (25%)
$74 .92
DIYPC ARGB-N3-W White USB3.0/ Type C Tempered Glass E-ATX /ATX Dual Chamber ...
Save: $36.05 (31%)
$78 .94
Free Shipping
+ $5 off w/ promo code BSBVF28, limited offer
- Motherboard Compatibility: Supports E-ATX, ATX, Micro ATX, and ITX motherboards, support BTF back plug-in MB
- 10 Fans Capability (3 x 120mm ARGB Reverse Blade PWM Fan x MB side, 1 x 120mm ARGB PWM Fan x rear pre-installed) Provide Great Cooling and Gaming Performance
- Water Cooling Ready – Top /MB side Support 360mm Radiator
- 2 Ways to Control RGB Fan Lighting: Either by Manual RGB LED Button on Top I/O Panel; or SYNC w/your Motherboard to control RGB lighting w/ARGB 5V/3 Pin Header. PWM ARGB Fan Hub Included
- Advanced Cable Management Design – Routing the main cable is easy and quick through a hidden channel. There is a large space behind the motherboard for all cables, making the case a clean and beautiful look
- Top Mounted IO ports - 2x USB 3.0 /Type C for up-to-date High Speed Data Transfer
- Advanced Bottom-mounted Power Supply Design
- Support up to 420mm VGA card
- Support up to 155mm CPU cooler
Save: $36.05 (31%)
$78 .94
DIYPC Vanguard-F2-Pro Black Dual USB3.0 and Type C Tempered Glass ATX Full Tower ...
Save: $50.00 (31%)
$109 .99
Free Shipping
+ $10 off w/ promo code BSBVF32, limited offer
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboards, support BTF back plug-in MB
- 11 fans capability (4 x 120mm ARGB PWM fans x MB side , 1 x120mm ARGB PWM fan x rear pre-installed) provide great cooling and dynamic cyber gaming atmosphere
- Water Cooling Ready –MB side support 480mm /Top support 360mm radiator
- 2 ways to control ARGB LED fan lighting: either by manual ARGB LED button on bottom; or if your motherboard has 5v addressable connector, this case has ARGB 5V/3 pin header ready to SYNC w/your motherboard to control ARGB lighting. ARGB HUB controller with PWM is included.
- Front/Top/Left and Right side panel tool-free disassembling structure - provide fast installation with no hassle
- Top mounted IO ports - 2x USB 3.0 and 1x Type C for up-to-date high speed data transfer
- Separate HDD /SSD and PSU slots space, good heat dissipation design
- Advanced cable management design - 38mm
- Advanced bottom-mounted power supply design
- Magnetic dust filter at top / bottom - easy clean
- Support up to 180mm CPU cooler
- Support up to 420mm VGA card.
- 1 x accessory kit included
Save: $50.00 (31%)
$109 .99
LIAN LI LANCOOL 216RX Black Steel / Tempered Glass ATX Mid Tower Computer Case ,2x 16 ...
$99 .99
Free Shipping
- CONTINUOUS FRONT TOP MESH - To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud's side. The front mesh extends to the top for a continuous mesh panel. 2x160MM FRONT FANS AND 1x140MM REAR FAN INCLUDED LANCOOL 216 RGB FANS - The included 160mm ARGB fans feature two channels of LEDs that can be controlled separately via an optional accessory, or via the motherboard lighting software by connecting them directly to a motherboard 5V 3pin header. FRONT I/O CAN BE RELOCATED - Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB type C port, the front I/O module can be relocated to the lower left side of the front panel. LATEST GEN, GPU READY - With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.
$99 .99
MSI MAG Coreliquid A15 360 Black- AIO ARGB Liquid Cooling - 360mm Radiator - Triple ...
Save: $22.27 (20%)
$89 .99
Free Shipping
- CycloBlade Design: Focuses airflow and reduces noise.
- ARGB GEN2: Customize the perfect lighting effects for you through MSI CENTER.
- EPDM Tubing: Durable and effective in preventing coolant evaporation.
- Pre-installed Fans: Saves gamers installation time and enhances the assembly experience.
- Enhanced Cooling for Stable AI Performance: Precise heat source targeting for stable CPU performance
- Easy installation: Pre-installed UNI Bracket (1700/1851/AM4/AM5)
Save: $22.27 (20%)
$89 .99
DIYPC Vanguard-F1-BK -Black Dual USB3.0 and Type C Tempered Glass ATX Full Tower ...
Save: $44.05 (26%)
$125 .94
Free Shipping
- Motherboard Compatibility: Supports E-ATX, ATX, Micro ATX, and ITX motherboards, support BTF back plug-in MB
- Tempered glass side panel x 3 side of 4mm thickness not only offers great protection, but also provide wide angle for optimized visualization while the system is running
- 10 fans capability (3 x ARGB 120mm PWM fans x MB side , 1 x ARGB 120mm PWM fan x rear pre-installed ) provide great cooling and dynamic cyber gaming atmosphere
- ARGB HUB controller with PWM is included.
- Water cooling ready - top , MB side and front can fit up to 360mm water cooling radiator
- Front/Top/Left and Right side panel tool-free disassembling structure – provide fast installation with no hassle
- Bottom mounted IO ports – 2x USB 3.0 and 1x Type C for up-to-date high speed data transfer
- Separate HDD and PSU slots space , good heat dissipation design
- Support up to 470mm VGA card
- Support up to 180mm CPU cooler
Save: $44.05 (26%)
$125 .94
DIYPC ARGB-DC120-TM Black USB3.0 Tempered Glass Micro ATX Gaming Computer Case w/ ...
Save: $50.02 (50%)
$49 .97
- DIYPC ARGB-DC120-TM is a panoramic Micro ATX case w/dual tempered glass with a 270° full view of your masterpiece for building high-performance system. It has top, front and side tempered glass panel. Advanced cable management design - routing the main cable is easy and quick through a hidden channel. 2 ways to control ARGB Fan Lighting: Either by Manual ARGB LED Button on Top I/O Panel; or if your motherboard has 5v addressable connector, this case has ARGB 5V/3 pin header ready to SYNC w/your
- motherboard to control ARGB lighting. ARGB HUB controller with PWM is included.
- Water cooling ready - Top/Bottom support up to 360mm, MB side support up to 240mm liquid cooling
- Advanced bottom-mounted power supply design
- Top mounted IO ports - USB 3.0 for up-to-date high speed data transfer
- 9 fans capability (2 x 120mm ARGB reverse blade PWM fan x MB side, 1 x 120mm ARGB PWM fan x rear pre-installed) provide great cooling and gaming performance
- Magnetic dust filter at top/bottom - easy clean
- Support up to 160mm CPU cooler
- Support up to 410mm VGA card
Save: $50.02 (50%)
$49 .97
CORSAIR 3500X RS-R ARGB Mid-Tower PC Case – 3x Pre-Installed RS120-R ARGB Fans – GPU ...
Save: $40.00 (33%)
$81 .99
Free Shipping
- Wraparound glass view with removable front and side panels
- Three pre-installed RS120-R ARGB fans
- Builder-friendly features for a high-performance custom PC
- Side, roof, and PSU fan mounting points for great cooling
- Compatible with reverse connection motherboards
Save: $40.00 (33%)
$81 .99
DIYPC IDX1-BK-ARGB Black USB3.0/ Type C Tempered Glass ATX Gaming Computer Case w/ ...
Save: $50.02 (50%)
$49 .97
- Motherboard Compatibility: Supports ATX, Micro ATX, and ITX motherboard
- 9 Fans Capability (2 x 120mm ARGB Reverse Blade PWM Fan x MB side, 1 x 120mm ARGB PWM Fan x rear pre-installed) Provide Great Cooling and Gaming Performance
- Water Cooling Ready – Top Support 360mm AIO
- 2 Ways to Control RGB Fan Lighting: Either by Manual RGB LED Button on Top I/O Panel; or SYNC w/your Motherboard to control RGB lighting w/ARGB 5V/3 Pin Header. PWM ARGB Fan Hub Included
- Advanced Cable Management Design – Routing the main cable is easy and quick through a hidden channel. There is a large space behind the motherboard for all cables, making the case a clean and beautiful look
- Bottom Mounted IO ports - 2x USB 3.0 /1x Type C for up-to-date High Speed Data Transfer
- Advanced Bottom-mounted Power Supply Design. Support 240mm long full ATX power supply to run the most power hungry system.
- Support up to 420mm VGA card
- Support up to 174mm CPU cooler
Save: $50.02 (50%)
$49 .97
Loading Dynamic Data...
