NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Material: nylon w/magnetic frame Color: Black Dimension:140 x 140mm/5.51 x 5.51"(L x W) Package Included: 1 x Dust Filter Mesh and screws bag
Features: Convenient magnetic frame design for easy installation, Suitable for the home computer chassis fan dust, speaker speaker grilles and a variety of electrical and electronic products speakers dust protection. Help to keep your PC and PC components clean,minimize the noise from the fan and extend the life-span of your fan. Practical and useful computer accessory,Can protect you computer from overheating,Can be helpful in keeping your computer components clean. Suitable for computer case fan with 14cm diameter
Features: Ports: 1 x USB 3.0 + 1 x USB 2.0 Type-A Female Supports 3.5mm stereo HD audio outout Supports 3.5mm microphone input USB Data Transfer Rate: Up to 5Gb/s max. Fits: 3.5" Open Bay Space Cable Length: 50cm Compatible with Windows XP/Vista/7/8/8.1 Plug and Play Hot Swappable Backwards compatible with USB 1.1,USB 2.0 and USB 3.0
Package Contents: 1x USB Front Panel Bay 1x Pack of Screws
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating.
With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips.
It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc.
Package included:
10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.8mm
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 20mm x 20mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 20mm x 20mm x 6mm
3M 9448A Heat-conductive adhesive tape is included
Package Content: 10 x Heatsink
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Purchase different thickness copper thermal pad you purpose one-step,default combination:
1 piece - 0.1mm
1 piece - 0.3mm
1 piece - 0.4mm
2 pieces - 0.5mm
1 piece - 0.6mm
2 pieces - 0.8mm
1 piece - 1.0mm
1 piece - 1.2mm
Features: Aluminum Heat-Sink, For Package TO-220 / TO-3P / TO-247/MTDA7294/L298 Rectifier, Transistor or Regulator IC.
Quantity: a lot of 5 Pieces.
Pin Number : 2
M3 Screw Hole.
Size: 25 x 23 x 16mm/1" x 0.9" x 0.6"(L*W*H
Color : Silver Tone
Weight: 7g/ piece
Please check the specification table and make sure that the size of the heatsink fits that of your component
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsinks to the corresponding ...
Features: Product Description Aluminum IC heatsink for Router,power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, etc.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 20mm x 14mm x 6mm,Please check your componet careful, and make sure the size of the heatsink fits it no problem
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H)
Weight: 25g
Package Content: 10pcs x Heatsink
Features: Expand by connecting up to 4 USB 2.0 to USB 2.0 capable computer
Supports USB 2.0 transfer rates up to 480 Mbps
Reverse Compatible with USB 1.1
Cable length is 50CM
Features: Ports: 1 x USB 3.1 Gen 1 5Gbps Port + 2 x USB 3.0 Type-A Female Supports 3.5mm stereo HD audio outout Supports 3.5mm microphone input USB Data Transfer Rate: Up to 5Gb/s max. Fits: 3.5" Open Bay Space Cable Length: 80cm Compatible with Windows XP/Vista/7/8/8.1 Plug and Play Hot Swappable Backwards compatible with USB 1.1,USB 2.0 and USB 3.0
Features: Product Description Aluminum IC heatsink for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, Router, Computer Component etc
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 22x22x10mm,Please check your component dimension carefully,and make sure size of the heatsink fits it no problem.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Gold Plated
Overall Size: 22 x 22x 10mm/ 0.87" x 0.87" x 0.4" (L*W*H)
Weight: 35g
Package Content: 5pcs x Heatsink
Dimensions: 22 x 22x 10mm/ 0.87" x 0.87" x 0.4" (L*W*H)