NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Features: 5.25-inch Front Bay to 4-Port USB 3.0 Panel Hub turns any available 5.25-inch computer case front bay into a 4-Port USB 3.0 hub. Using only a single USB connection, this front panel hub adds four easily accessible USB ports to the front of your computer case through a 5.25-inch bay Each of the added ports is compliant with the USB 3.0 standard which supports up to 5Gbps of bandwidth and up to 900mA of power. Installation is quick and easy, and the unit is plug and play. Simply fit the bay into the space with the screws provided, plug the bay into the USB 3.0 20 pin connector on the motherboard, and you're all set. Features: Ports: 4 x USB 3.0 Data Transfer Rate: Up to 5Gb/s Fits:...
Features: Anodized Black Aluminum heatsink for Computer General CPU, GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 25mm x 25mm x 10mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 25x 25x 10mm/ 1" x 1" x 0.4" (L*W*H)
Weight: 30g
Package Content: 5pcs x Heatsink
Features: 5 pcs of 14x14x6mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape
Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface.
The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface
Excellent adhesive performance with good wetting and flow onto many substrate surfaces. Th...
Features: Widely use for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, 3D Printer A4988 chipset,router chipset, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 20mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H)
3M 9448A Heat-conductive adhesive...
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating.
With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips.
It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc.
Package included:
10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.0mm
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Package included:
10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
Features: Lightweight 4 pieces/setof aluminum heat sinks with adhesive backing strip to stick firm With thermal transfer peel-and-stick tape,that allow for easy installation on to your board. Help keep your Pi cool while overclocking These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsinks to the corresponding chip modules and apply firm pressure. One Set ...
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...