NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Type :SATA power splitter cable with locking latch
Length:6 inch
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B:2 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Specifications: Connector A: 1x TX4 female. Connector B: 5x TX4 male. Connector Number: 5. Connector Detail: 5 Ports pigtail PWM fan power splitter hub. Cable Length: about 45cm. Color: Black. Mainboard Demensions: 58x18 mm.
Features: 5 Ports PWM fan hub,include 45cm sleeved black power cable, Deal for controlling numerous fans computer system Capable of expanding one motherboard PWM fan header to support up to five fans 12V Hub, Power by PSU Molex 4pin interface directly,Reduced your motherboard load when connect many fans Compatible with 12V 3-pin / 4-pin Fans(3pin fan no PWM function) Comes with Self-Stick Double adhesive tape for easy mounting to your computer case
Specifications: Type :SATA power splitter cable
Length:6 inch
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B:2 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Specifications: Size: 45mm x 33mm x 15mm( with adhesive) Fan Speed controller High position for 12V out put Low position for 7V output Off position for fans shut down Support total 8 fans 12V/2A max.
Features: Features: It is designed for enthusiasts with need for controlling numerous system fans Capable of expanding one molex 4pin or SATA 15pin header to support up to Eight 3pin fans fans. Powered directly by Molex 4-pin LP4 or SATA 15pin power cable from the computer power supply Compatible with 3-pin Fans Support Cable Management Comes with Self-Stick for easy installation and options to hide the PCB itself. Full manually switch for High Speed, Low Speed and fans shut down controling.Note: 1 . Please make sure molex 4pin or SATA 15pin power i...
Specifications: Type :SATA power splitter cable
Length:18 inch daisy chained
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B:3 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Specifications: Type :SATA power Adapter cable
Length: 8 inches
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B: SATA 15-pin Female with locking latch
Power supports:12V/5V SATA devices
Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. SATA 15 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 007S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign