NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
External USB Ports: 4 x USB 3.2 USB Type-A (9 pin, Gen 2, 10 Gbps)
Standard: USB 3.1 Specification Rev. 1.0
USB Specification Rev. 2.0
PCI Express Base Specification Rev. 2.0
Intel xHCI Specification Rev. 1.1
UASP (USB Attached SCSI Protocol) Rev. 1.0
Data Transfer Rate: USB 3.2 Gen 2 - 10 Gbit/s
Operating Systems Supported: Windows 7, 8, 8.1, 10
Windows Server 2012 R2, 2016, 2019
macOS 10.13 to 10.15, 11.0
Linux 3.5 or later LTS version only
Compatibility: PCI Express enabled computer or server with a PCI Express x4 slot or higher (x8, x16)
Optional SATA power connector
Note:
This card can share up to 20Gbps of bandwidth (up to 10Gbps, per port). However, the maximum throughput of the card is limited by the maximum throughput of the PCI-Express interface it's connected through
The a...
Features: Add 4 Internal SATA III (6Gbps) ports to a computer through a PCI Express x2 slot. The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds 4 AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs).
Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the perfor...
External Ports: 2 - USB 3.0 A (9 pin; SuperSpeed) Female
Internal Ports: 1 - SATA Power (15 pin) Plug
2 - IDC (20 pin; USB 3.0; Motherboard Header) Receptacle
Standard: USB 3.0
Data Transfer Rate: Up to 5.0 Gbps
Operating Systems Supported: Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64)
Windows Server® 2012, 2008 R2
Linux 2.6.31 and up (Tested up to 3.5)
Operating Systems Supported: Windows 8
Windows 7
Vista
Windows XP
Windows ME
Windows 98/98SE/98ME
Server 2003
Server 2000(32bit Only)
Linux Kernal 2.4 & 2.6
Mac 10.4 & Above
Specifications: PCI Express:
Fully Compliant with PCI Express Base Specification, Revision 1.0a
PCIe Multi Function Peripheral Controller with x1 lane Interface
Support for D1, D2, D3 Hot and D3 Cold
Utilizes 100-MHz Differential PCI Express Common Reference Clock
Support PCIe Power Management
Serial Port:
Four 16c450/550/Extended 550 Compatible UARTs
Supports RS232 Modes
Bi-directional Speeds from 50 bps to 16 Mbps/Port
Full Serial Modem Control
Supports Hardware, Software Flow Control
5, 6, 7, 8 and 9-bit Serial Format Support
Support MODEM Modem Signals CTS, DSR, RI, DCD, th...
Operating Systems Supported: Windows 98SE/ME/2000/XP/Server 2003, Mac OS 10.2.4 and up
Features: Compliant with 1394 Open Host Controller Interface Specification 1.1
Hot-swapping feature allows you to connect and discount devices without powering down the system
Maximum data transfer rate of 800 Mbps
Compatibility: Compatible with Windows XP/7/8/10/MAC/NAS/Linux OS. No driver installation is required. Support install Windows OS from Win10 PE.
Specifications: The IO Crest 2 Port SATA III 6Gb/s M.2 22x42 Controller Card ( SI-ADA40149 ) is the easiest way to update any computer with SATA ports with a free M.2 slot. Once installed¸ this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device.
Using the JMB582 chipset, the SI-ADA40149 can provide a maximum sequential Read / Write Speed of 850 MB/s to 2 SATA 6Gb/s ports. For the...
External Ports: 2 x Thunderbolt 3 USB-C (24-pin) Female
1 x DisplayPort (20 pin) Female
Internal Ports: 1 x PCI Express x16 Female
Data Transfer Rate: Up to 40 Gbps (Thunderbolt 3)
Operating Systems Supported: Windows 10 (32-bit or 64-bit), 8 / 8.1 (32-bit or 64-bit), 7 (32-bit or 64-bit)
macOS 10.12 (Sierra)
Specifications: Fan(s): 1 x 92 mm fan
Air Flow Rate : 14.06 CFM
Noise Level: 24.55 dB
Fan Bearing Type: Sleeve Bearing
Chipset ID: Intel - Alpine Ridge DSL6540
LED Indicators: 1 x Power(Blue)
Center Tip Polarity: Positive
Input Current : 2A
Input Voltage : 100 ~ 240 AC
Output Current: 5.417A
Output Voltage: 12 DC
Power Consumption (In Watts): 65W
Power Source: AC Adapter Included
Note:
This expansion chassis does not provide full power delivery but will...
Operating Systems Supported: Windows 7 (32/64-bit)
Vista (32/64-bit)
Windows XP (32/64-bit)
Windows 2000 (32/64-bit)
Server 2003-2008 (32/64-bit)
Specifications: Real Connector: Molex (IDE 4-pin) Power Connector
Based on VLI VL80x (VL800-Q8) USB 3.0 Host Controller IC
Compliant with Intel's Extensible Host Controller Interface (xHCI) Specification Revision 0.96
Compliant with PCI Express Base Specification 2.0
PCI-e Specification:
- PCI-Express 2.0 1-Lane (x1) Interface with Data Transfer Rate up to 5Gbps
- Backwards Compatible to PCI-Express 1.0a with Data Transfer Rate up to 2.5Gbps
- Internal HDD Power Connector for Supplying Extra +5V Power to the USB Ports
- Internal HDD Power Con...
Data Transfer Rate: FireWire 800 IEEE-1394b - 800 Mbit/s
Operating Systems Supported: Windows 2000, XP, Vista, 7, 8, 8.1, 10, Windows Server 2003, 2008 R2, 2012, 2016, Mac OS 10.6 to 10.12, Linux 3.5.x to 4.4.x LTS Versions Only
Features: Two 9-pin FireWire 800 ports, each with transfer rates up to 800Mbps
One 6-pin FireWire 400 port, each with transfer rates up to 400Mbps
Includes full/standard profile installation bracket
Built with a native PCI Express chipset, no bridge chip
Internal power connector for high-powered FireWire devices
Compliant with IEEE 1394b and backwards compatible with IEEE 1394a - 2000 as well as 1394-1995 standards
Plug-and-Play and hot-swap compatible...