NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Package included:
10 pcs Thermal Conductive Copper Shims 15mm x 15mm x 0.4mm
Features: 10 pcs of 8.8x8.8x5mm aluminum heat sinks with 3M 8810 Heat transfer Peel and Stick Tape
Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Come with 3M 8810, is a tacky pressure sensitive adhesive loaded with thermally conductive ceramic fillers that do not require a heat cure cycle to form an excellent bond to many substrates. Only pressure is needed to form an excellent bond and thermal interface.
The specialized chemistry of 3M 8810 renders the tape modestly soft and able to wet to many surfaces, allowing it to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface
Excellent adhesive performance with good wetting and flow onto many substrate surfaces....
Features: These heatsinks have a layer of thermal adhesive that allow for easy installation on to your board. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. Tested to fit the Raspberry Pi CPU / SoC; Reduce the risk of hardware failure due to overheating. These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips. These heat sinks can be used with other devices such as the Beaglebone to cool processor, regulators, etc. Installation Instructions: -Make sure the chip modules are free from dirt and grease. -Peel the protective liner off on the base of the heatsink. -Apply the heatsi...
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating.
With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips.
It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc.
Package included:
10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 0.5mm
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc.
Use heatsink adhesive glue to install heatsink .(Glue is not included)
Please check the specification table and make sure the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 8.8mm x 8.8mm x 5mm
Weight: 35g
Package Content: 50 x Heatsink
Features: 8pcs/lot Cooper Cooling Heatsinks cooler Set
Heat Sink Size 22X8X5mm,Solid copper construction, easy to install.
These Premium Copper Heatsinks are a perfect solution for cooling your Computer Motherboard,GPU VGA Video Graphics Card, DDR DDR2 DDR3 RAM Menory and ANA/Southbridge chips.
Developed from pure copper, cools better than aluminum. (Increase thermal conductivity)Dissipates RAM heat to improve its performance.Reduces the temperature of the memory.Compatible with all standard SD/DDR SDRAM.
High conductivity thermal adhesive tape backing,Can be removed and re-applied.
Material : Copper
Thermal conductivity: 401w / mk
8pcs Thermal Conductive Copper 22mm x 8mm x 5mm
Application:
Cooling for electronic products, such as:
Video card, Graphic card,VGA,GPU
Motherboard,systemboard
DDR DDR2,DDR3 RAM Menory
Northbridege, Southbridge...
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Features: Widely use for 3D Printer A4988 chipset,computer PC chipset, power IC, power electric device, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 14mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 14mm x 14mm x 6mm
3M 9448A Heat-conductive adhesive tape is included
Package Content: 20 x Heatsink
Features: Aluminum heatsink are generally used in the heat treatment and the fins increase the area of the board and thus provide for greater heat transfer.
GPU graphics card Cooling Heatsink Kit is a fan-less cooling solution to any GPU, graphics card, video card. And,Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.
Use heatsink adhesive glue to install heatsink .(Glue is not included)
Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name :GPU Video Card Heatsink;
Material : Aluminium
Color : Silver Tone
Package Content :
15 pieces - 8.8mmx8.8mmx5mm Heatsink
10 pieces - 14mmx14mmx6mm Heatsink
8 pieces - 20mmx14mmx6mm Heatsink
Features: Product Description Aluminum IC heatsink for PC Chipset power transistor, FET, IC, power amplifier, Voltage Regulator,Computer VGA Northbridge Southbridge etc.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 35mm x 35mm x 10mm
Weight: 25g
Package Content: 2pcs x Heatsink
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating.
With this copper pad to greatly lower gpu temperatures, can be used for graphics, northbridge, CPU chips.
It can be used as heatsink solution for Xbox ,PS4 and all laptop and computer such as HP,Dell,Acer,Thinkpad etc.
Package included:
10 pcs Thermal Conductive Copper Shims 20mm x 20mm x 1.2mm
Features: Widely use for Router,Memory,IC ,LED,fan cooling and Various mini DC converter circuit board.
Use heatsink adhesive glue to install heatsink .(Glue is not included)
Size is 50mm x 28mm x 8mm,Please check the specification carefully and make sure that the size of the heatsink fits your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 50 x 28 x 8mm/ 2.0" x 1.1" x 0.31" (L*W*H)
Weight: 22g/ea.
Package Content: 2pcs x Heatsink
Features: Anodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Anodized Black
Overall Size: 28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H)
Weight: 5...
Features: This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk
CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic
at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the
Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc
Features: Widely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name : Heatsink
Material : Aluminium
Color : Silver Tone
Overall Size : 14 x 14x 6mm/ 0.55" x 0.55" x 0.24" (L*W*H)
Weight : 100g
Package Content : 50 x Heatsink
Features: Anodized Gold Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example:Hard drive disk HDD,RAM, GPU, Graphics Card, Vidoe Card,also can be used for cooling of ,northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 45mm x 45mm x 10mm, Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Gold Plated
Overall Size: 45 x 45x 10mm/ 1.8" x 1.8" x 0.4" (L*W*H)
Weight: 30g
Package Content: 1...