NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Size: 45mm x 33mm x 15mm( with adhesive) Fan Speed controller High position for 12V out put Low position for 7V output Off position for fans shut down Support total 8 fans 12V/2A max.
Features: Features: It is designed for enthusiasts with need for controlling numerous system fans Capable of expanding one molex 4pin or SATA 15pin header to support up to Eight 3pin fans fans. Powered directly by Molex 4-pin LP4 or SATA 15pin power cable from the computer power supply Compatible with 3-pin Fans Support Cable Management Comes with Self-Stick for easy installation and options to hide the PCB itself. Full manually switch for High Speed, Low Speed and fans shut down controling.Note: 1 . Please make sure molex 4pin or SATA 15pin power i...
Specifications: Type :SATA power splitter cable
Length:18 inch daisy chained
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B:3 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Specifications: Comb power button & reset button on Power supply and HDD working status LED indicators w/ PMMA case for switch protection Covered self-adhesive in bottom for easy installation 2FT in cable length
Features: Desktop PComputer power button: Making Power Computer much easier. 2FT Flat power cable:Located computer in a hard to reach area , this is a convenient switch on the desk and hitting it rather than bend down to turn the computer on Motherboard power switch: There Are Two Buttons on the Switch. One is power button in the center and the other is a reset button. PMMA Case:Switch is made of acrylic material, concise, exquisite and practical. It is recommended for home users, computer rooms, bare board machines, water-cooled chassis DIY, etc. LED Indicator:Power su...
Specifications: Type: ATX P4 to EPS 8pin power adapter cable
Wire Gauge: 18AWG Tinned Copper
Cable Length: 6 inch
Connector A: 1 x ATX CPU P4 Female
1 x Molex 4pin Male
Connector B: 1 x EPS 8pin Male
Voltage:12V DC
Features: 12V 4pin AURA RGB Lighting application only Does NOT work for 5V RGB system 1FT female to female extension cable for motherboard 4pin RGB header Come with 4pin male to male Gender Changer pin Notes: 1. Generally, RGB interface in motherboard can provide at least 12V/1A,12W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod, please reduce connected RGB devices 4.Make sure arrow mark on the plug corresponds to RGB 12V on bother motherboard correct
Features: This is 4Pin RGB PWM 2-in-1 8 way hub with SATA 15pin power that can supply power to fans and RGB devices at the same time. Extend the motherboard interface of the chassis to solve the problem of insufficient motherboard interfaces. Power by PSU SATA interface,reduce motherboard load,reduce motherboard overload and heat,widely used in PC computer water cooling systems and multiple RGB lighting controls. Up to 8 sets of RGB 12V 4pin) plugs and 8 sets PWM (12V 4pin) plugs to meet your needs of connecting more devices. Support simultaneous startup of 8 way fans, RGB is all synced between all fans, one setting applies to all fans (speed and color). The RGB of this hub is 12V 4-pin.Only compatible with 4pin 12V RGB headers or controllers, don't connect to 5V ARGB components, otherwise it might burn out. Support Motherb...
Specifications: Type :PWM fan power cable
Length:16 inches (8+4+4) daisy chained
Conductor:24AWG Copper
Connector A:1 x 4pin PWM fan TX4 female
Connector B: 3 x 4pin PWM Fan TX4 male
Power supports:12V/5V fans
3-PIN & 4-PIN fan compatible
Type: PCIe Power Adapter Board w/ 6pin power cable kit
Length: 50CM/19.7 inch
Cable Length: 1.64 ft. (0.50m)
Connector Number: 10
Specifications: En-Labs KITPSUSW6PX106P 10 ports PCIe 6-pin GPU Mining Power Supply Breakout Board w/ 10pcs PCIe 6pin male to PCIe 6pin male power cable Measured maximum can support to 1600W power supply, 10 ports graphics card 6pin output. The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. 10pcs UL Listed 18AWG PCIe 6pin male to male power cable include,able to withstand greater current and high power appliances, 50CM/19.7 inch in cable length, easy to use and connect This item is Compatible with GPU Mining Power Supply.Supported "Common Slot" Power Supply Models: - DPS-800GB A - DPS-1200F...
Specifications: The perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PCB for direct connection to your power supply ,reduces the power burden on your motherboard and ensures maximum compatibility with your power supply. 1X PCI-E Card exits motherboard slot at a 90 degree turn, easy cable manage for Small Form Factor Computer Case 1x adapter PCI-E c...