NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Type :PWM fan power cable
Length: 10 inches
Conductor:22AWG Copper
Connector A:1 x 4pin PWM fan TX4 female
Connector B: 2 x 4pin PWM Fan TX4 male
Power supports:12V/5V fans
3-PIN & 4-PIN fan compatible
Specifications: The PWM ARGB hub is equipped with two connecting cables. 1.3FT Motherborad PWM RPM feedback cable include 2FT Motherboard 3pin ARGB cable include With wireless IR remote control for any 5V ARGB devices.No motherboard ARGB supporting is nneded Make sure remote using distance less than 6.6FT
Features: The perfect solution for setting up Ethereum mining rigs, whether small open air rigs or large rack based miners. 4 High Quality Solid Capacitors for stable and safe power delivery. Multiple Voltage Regulation Components (Voltage Regulating Diode and Linear Regulator) Overcurrent Protection (Surface Mounted Fuse) to safeguard your components in the event of a short circuit. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. Integrate Molex 4pin, SATA and 6-pin PCI-E power interface on PCB for direct connection to your power supply, reduces the power burden on your motherboard and ensures maximum com...
Specifications: 3 High Quality Solid Capacitors, Voltage Regulation, and Overcurrent Protection. 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. SATA 15 PIN interface allows card to run off of separate power rails independent from motherboard effectively reducing power strain on motherboard Version 007S riser kits are the perfect solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners. Compatible with 1x, 4x, 8x,16x PCI-E motherboard slots for ethereum mining Note: Please set BIOS PCIe to GEN2 or GEN 1 if graphics card can not be identified or marked '!' warning sign
Specifications: Type :SATA power Adapter cable
Length: 8 inches
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B: SATA 15-pin Female with locking latch
Power supports:12V/5V SATA devices
Specifications: Type :PWM fan power cable
Length: 18 inches
Conductor:26AWG Copper
Connector A:1 x Molex 4pin LP4 male
Connector B: 5x 4pin PWM Fan TX4 male
1 x 4pin PWM Fan TX4 female for RPM feedback
Power supports:12V/5V fans
3-PIN & 4-PIN fan compatible
Specifications: Type :SATA power splitter cable
Length:20 inch daisy chained
Conductor:18AWG Copper
Connector A:Molex 4pin male
Connector B:4 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Specifications: This cable features Large Internal Molex 4pin Power Male, to Small Internal Power Female connectors.Convert a LP4 4pin IDE power plug into a floppy type SP4,Suitable for adding SP4 equipted adapters, floppy drives etc. SPec Type : Molex LP4 to SP4 power adapter cable Connector A : Molex Large 4pin Male Connector B: Molex small 4pin Female Cable Length : 15CM/6 inches Voltage: 5V/12Vcd
Specifications: Addressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.
Features: 5V 3pin FRGB Controller, Ideal for RGB case, coolers and radiators fans Power by SATA from PSU, good solution for RGB control if your motherboard no 5V RGB header, Just for 5V RGB / ARGB system Does NOT work for 12V RGB system Supports monochrome,horse racing,rainbow and other RGB modes No software required - No RGB motherboard required
Features: 5V 3pin AURA RGB Lighting application only Does NOT work for 12V RGB system 1FT female to female extension cable for motherboard 3pin RGB header Come with 3pin male to male Gender Changer pin Notes: 1. Generally, RGB interface in motherboard can provide at least 5V/3A,15W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod, please reduce connected RGB devices 4.Make sure arrow mark on the plug corresponds to RGB 5V on bother motherboard correct