NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Addressable RGB Splitter Hub This splitter hub connects to the 3-pin 5V addressable RGB header or controller on your motherboard, allowing you to add 10 ARGB fans or strips for lighting synchronization via motherboard software. It is compatible with ASUS AURA SYNC, GIGABYTE RGB Fusion, MSI Mystic Light and ASRock RGB LED. An extra Molex power interface ensures stable power delivery for all the ARGB devices. Built-in PMMA case offers solid protection while the included sticky pad makes installation quick and easy. A 1ft RGB extension cable is also included for your convenience.
Features: 5V 3pin FRGB Controller, Ideal for RGB case, coolers and radiators fans Power by SATA from PSU, good solution for RGB control if your motherboard no 5V RGB header, Just for 5V RGB / ARGB system Does NOT work for 12V RGB system Supports monochrome,horse racing,rainbow and other RGB modes No software required - No RGB motherboard required
Features: 5V 3pin AURA RGB Lighting application only Does NOT work for 12V RGB system 1FT female to female extension cable for motherboard 3pin RGB header Come with 3pin male to male Gender Changer pin Notes: 1. Generally, RGB interface in motherboard can provide at least 5V/3A,15W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod, please reduce connected RGB devices 4.Make sure arrow mark on the plug corresponds to RGB 5V on bother motherboard correct
Specifications: Extend the rare RGB interface on your motherboard to ten. Allow you to Control up to 10 channels RGB fans and lightning synchronously 12V AURA RGB Lighting Hub w/ 3M Self-Stick for PC case internal installation 1FT female to female RGB extension cable include Notes: 1. Generally, RGB interface in motherboard can provide at least 12V/1A(12W) power to periphery RGB device. The RGB hub no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod, please reduce connected RGB devices 4.Make sure arrow mark on the plug corresponds to RGB 12V on bother motherboard and hub
Features: Upgrade version 10 way 12V RGB LED Splitter Hub with PMMA Case and double side adhesive for ASUS/MSI 12V 4pin LED controller The 4 pin RGB hub can extend any 12V RGB products simultaneously, while only taking up one RGB header on your motherboard. The 12V RGB hub is only compatible with 4pin 12V RGB headers or controllers. not connect to 5V ARGB components Extend the rare RGB interface on your motherboard up to 10 ports Allow you to Control more channels RGB fans and lightning synchronously 12V 4-pin AURA RGB Lighting extension cable include
Specifications: Wireless IR remote control Power - Ture On/Shut Down Speed - effect speed Accelerate/Decelerate Brightness - Increase/reduce brightness Mode Selection - click for small mode selection / 2 second long press for large mode selection Automatic Cycle Mode - Autoplay all RGB effect, 10 senconds each mode Single Color Selection - White / Red / Green / Blue single color set up 3 bottons manual control Mode switch button -switch between 6 lighting effects Speed switch button - 6 speed range cycle switching Color switch button - adjust your LED lights color and brightness levels
Specifications: Type :SATA power splitter cable
Length:8 inch
Conductor:20AWG Copper
Connector A:Molex 4pin male
Connector B:2 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Features: SATA to 5V 3-Pin ARGB AURA 3 Button Controller w/ 4 ARGB Splitter Extension Cable for ARGB Strip Fans and Coolers 5V ARGB Controller,Ideal for RGB case, coolers and radiators fans Power by SATA interface from PSU,good solution for RGB control if your motherboard no 3pin ARGB header, 50cm in controller length, incldue power cable 3 buttons for Dynamic Mode,Static Color , Dynamic Speed and Static Color brightness select No software required - No RGB motherboard required Come with 3-pin ARGB 1 to 4 splitter cable, some device can be controlled at the same time
Specifications: Type: 4 ports fan hub Cable Length : 30cm Color :black sleeved cable Connector A: 1 - TX4 4-pin Female Connector B: 1- TX4 4-pin Male for CPU fan (including Detect tach pin) 3 - TX4 4-pin Male for case fan Voltage:12VDC
Features: Extend the rare RGB interface on your motherboard to two Allow you to Control 2 channels RGB fans and lightning synchronously 5V 3-pin AURA RGB Lighting extension cable 1FT female to female RGB extension cable, Male to Male pin adapter is incldued Does NOT Compatible with 12V 4pin RGB system Notes: 1. Generally, RGB interface in motherboard can provide at least 5V/3A,15W power to periphery RGB device. The RGB cable no extra power suplly capacity. 2. Suggest to connect RGB lightning less than 3.3ft 3. If Connected RGB devices are dimmed out, means motherboard RGB interface is overlaod, please reduce connected RGB devices 4.Make sure arrow mark on the plug corresponds to RGB 5V on bother motherboard correct