NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Specifications: Case: Plastic
Power Voltage: 5.0v
Amps: 300mA
Power Consumption: 300mA
USB Specification: USB 1.1
USB bandwidth: 1.5 and 12 Mbps
Power Input Rating: PC USB port internal power suppl
Package Contents: 1x Local Unit (1 ft USB Cable attached)
1x Remote Unity
Specifications: Video Input: HDMI (FEMALE)
Video Output: HDMI (FEMALE)
Number of Monitors Supported: 1
Video Ports : HDMI (FEMALE)
Video Ports Details: HDMI 2.0; HDCP 2.2
Supported Resolutions: 1280 x 720 (720p); 1920 x 1080 (1080p); 3840 x 2160 (4K)
Max Supported Video Resolution: 3840 x 2160 @ 60 Hz
Max. Distance (Between any 2 Units): 230 ft.
Maximum Distance with Booster: 400
Receiver/Transceiver Video Output: HDMI
Receiver - Number of Video Outputs: 1
Max Supported Color Depth: 36-bit Deep Color
HDR Support: Yes
3D Video Supported: Yes
Chroma Sub Sampling: 4:4:4
Maximum Signal Range (m): 70
HDCP Specification: 2.2
Driver Required: No
Recommended Category Cable: 26AWG STP Cat6/6a
EMI/RFI Line Noise Protection: Yes
DIN Mountable: No
Integrated/Removable Cable: No
Includ...
Max Extend Distance: CATx: 328 feet. (100 m); single-mode fiber (SFP): up to 30 km
Color: Black
Specifications: HDMI 4K video over IP
This attractively priced IP video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI 4K video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load.
Plug-and-play setup
Because the transmitter and receiver install directly into your existing LAN infrastructure, integration is easy. And you don't have to configure any IP settings. Connect your source, your display, a network switch, and you're ready go.
PoE support for remote powering
The MediaCento IPX 4K is PoE powered eliminating the need for power supplies. Using a PoE netwo...
Specifications: Dimensions:
1.20" Height x 1.50" Width x 3.30" Depth - Transmitter
1.10" Height x 3.40" Width x 1.30" Depth - Receiver
Weight (Approximate):
2.56 oz - Transmitter
7.04 oz - Receiver
Additional Information:
Operate USB 2.0 peripherals up to 330ft (100m) from a computer
Supports low and high-speed USB
Uses industry-standard CAT5, CAT5e, or CAT6 cable
True plug-and-play, 100% hardware solution with no drivers required
Operates at full 480 Mbps speed when running in USB 2.0 mode
Receiver supports up to 2 USB powered connections at 500 mA each
Link Connectors: RJ-45 Shielded
USB Connectors: Transmitter: (1) USB type B
USB Connectors: Receiver: (2) USB type A
Green Compliance: Yes
Green Compliance Certificate/Au...
Specifications: Audio: Yes
Cabling: Cat 5e UTP or better
Daisy-Chain: Yes
Rack-Mountable: Yes
Audio Specifications: 7.1 Channel Surround
Max Distance: 100 m / 330 ft
Maximum Digital Resolutions: 1920x1080 @60Hz
Supported Resolutions:
1920 x 1080 @60Hz
1280 x 720
1680 x 1050
1600 x 900
1440 x 900
1360 x 768
1280 x 800
1280 x 768
Lower resolutions and refresh rates may also be supported
Wide Screen Supported Yes
Connector A: 1 x HDMI (19 pin)
1 x RJ-45
2 x RJ-11 Female
2 x 3.5 mm Audio Female
2 x 3.5 mm Mini-Jack (3 Position) Female
Connector B: 1 x HDMI (19 pin)
1 x RJ-45
2 x RJ-11 Female
2 x 3.5 mm Audio Female
2 x 3.5 mm Mini-Jack (3 Position) Female
Specifications: Max Supported Video Resolution: 4K x 2K (3840 x 2160) @60Hz
External Power Supply Input Specs (V / Hz / A): 100-240~50/60Hz, 0.35A
LED Indicators:
Tx: x3 ORANGE (Link Indicator, Local, Signal Transmission), x1 Green (Power)
RX: x1 Orange (Link Indicator), x1 Green (Power)
Connector A: Side A - Connector 1: (2) 3.5MM (FEMALE); MICRO-USB B (FEMALE)
Side A - Connector 2: (2) HDMI (FEMALE); LC DUPLEX (FEMALE)
Connector B: Side B - Connector 1: (2) 3.5MM (FEMALE); (2) USB A (FEMALE)
Side B - Connector 2: HDMI (FEMALE); LC DUPLEX (FEMALE)
Package Contents: Transmitter unit
Receiver unit
IR-IN cable
IR-OUT cable
(2) RS-232 terminal blocks
(2) External power supplies with 4.5 ft. cord (Input: 100–240V, 50/60 Hz, 0.35A; Output: 5V 2A)
(8) International plug...
Changer Type: HDMI Over Cat5 / Cat6 Remote Extender
Color: Black
Specifications: Shipping weight (lbs): 1.50
Shipping weight (kg): 0.68
Unit Dimensions (HWD/in): 1.0" x 4.50" x 2.50"
Unit Dimensions (HWD/cm): 2.54 x 11.43 x 6.35
Mounting accessories included: Yes
Color: Black
Weight: 1.1
Package Contents: B126-110 HDMI over Cat5 Active Extender remote / Repeater
External AC Power Adapter
Mounting Hardware
Screwdriver for Equalization Adjustment
User manual
Max Extend Distance: 1080p @60Hz: up to 196ft (60 meters)
4K (3840x2160) @30Hz: up to 114ft (35 meters)
Color: Black
Specifications: Compliant with HDMI 1.4
Supports HDCP and EDID pass through, Auto Skew Equalization, CEC, Deep Color and full 3D
Video Bandwidth: Up to 10.2Gbps (340MHz per channel)
Video Latency: < 20us
Audio: Surround sound (up to 7.1ch), stereo digital, DTS-HD Master Audio and Dolby TrueHD high bit rate
Supports full frequency IR signal from 20KHz to 60KHz
Bi-directional IR pass-through
Full Duplex RS-232 control up to 115,200bps through connector
Resolution: 480p / 720p / 1080i / 1080p@60Hz / 3840x2160p@30Hz (YUV 4:4:4 8-bit / YUV 4:2:0 10-bit)
Supports PoC (Power over Cable): allows a single power supply connected to either the TX or RX unit to power ...
Features: Connect to TV's to a singel HDMI video source over a single Cat5/6 cable
Extends an HDMI signal to 2 monitors up to 200 ft. from the source over a single Cat5e/6 cable.
Extends a 1080p (60Hz) signal up to 150 ft. from the source using Cat6 cabling, or up to 125 ft. using Cat5 cabling.
Extends a 1080i (60Hz) signal up to 200 ft. from the source using Cat6 cabling, or up to 175 ft. using Cat5 cabling.
Use 24 AWG, solid wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, to achieve maximum distance and resolution.
Further expand the range and number of monitors by adding B126-110 repeater units.
Add up to three repeaters on each Cat5e/6 channel, for a total of 4 displays per channel (An Active remote receiver should be the last un...