Features: Assemble tweezers
Chip extractor
Enclosed in a zippered vinyl case
Nut driver - 1/4 inch
Nut driver - 3/16 inch
Philips screwdriver - #0
Phillips screwdriver - # 1
Slotted screwdriver - 1/8 inch
Slotted screwdriver - 3/16 inch
Three prong parts retriever
Torx screwdriver
Tube to store spare screws and nuts
Features: Dimensions 24 inches (0.61M)x26 inches (0.66)
Highest quality static dissipative material-not the ineffective conductive system
Includes 10ft.(3M) grounding cord
Protect sensitive equipment from static damage
Rubber back-lies flat
Sits under CPU/VDT and keyboard
Top technical specifications-exceeds IBM & US military static control standards
Features: including each of the following:
PHILLIPS No. 00 x 50mm
PHILLIPS No. 1 x 50mm
SLOT 2.0 x 50mm
SLOT 2.4 x 50mm
SLOT 3.0 x 50mm
TORX T15 x 50mm
TORX T20 x 50mm
Specifications: Included in Package: Black leather holder
Instruction Manual
Remote Cable Tester
LED Indicators: Battery condition
Center conductor
Conductor indicators
Connected or 25 Ohm detected
No cable / No terminator
Non-parallel or 50 Ohm detected
Shielding
Short circuit detected
Product Height: 25 mm [1 in]
Product Length: 180 mm [7.1 in]
Product Weight: 250 g [8.8 oz]
Product Width: 110 mm [4.3 in]
Shipping (Package) Weight: 0.4 kg [0.9 lb]
Specifications: Resting length: 2ft
Max stretched length: 6ft
Dissipates static electricity during electronic repair and maintenance
Adjustable wristband
Molded ends for long life use
Package Contents: ESD Anti-Static Wrist Strap with Ground
Specifications: Tripp Lite's professional grade, high-volume Punch Down Cable Installation Tool, with adjustable impact, is the perfect multi-purpose tool for punching down Cat5/Cat6 cable to 110 jacks and patch panels, or, telephone wire to 66M blocks. Each blade (110 or 66) contains a cutting and non-cutting side. The blade not being used is stored in the handle compartment. Adjustable High/Low actuation setting accommodates termination requirements or installer preference.
Features: Professional, Installer Grade 110/66 Impact Punch Down Tool
Both blades (110 & 66) have cutting and non-cutting sides
Handle compartment for storing blade not in use
Adjustable impact preference
Rugged, Polyacetal Resin frame for long-life use
Features: Cut and strip flat cable by one option Functions for 8P/RJ-45 and 6P/RJ-12, RJ-11 All steel construction for long term durability Crimps two sizes of plugs Built-in cutter and stripper Precision ground Compact size, easy to handle Ratchet mechanism to keep tool closed when not in use
Features: Tests Pin Configuration of 10/100/1000Base-T, 10Base-2 (coax), RJ-11/RJ-12/RJ-45, EIA/TIA-356A/568A/568B, and Token Ring Cables Tests USB and IEEE 1394 cables with optional adapters Built-in Tone Generator for tracing cable with standard Tone Probe Tests the grounding on shielded (screened) cable Verifies cable continuity, opens, shorts, and miswires Tests cable up to
Specifications: Test Services:
Detects IntelliTone digital signal and 1 kHz signal from analog toners.
Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling.
Ports: 1 x RJ-45 10/100Base-TX Network
Connectivity Media:
Twisted Pair
Coaxial
10/100Base-TX
Status Indicators:
8 LED indicators
1 Synch LED indicator
Batteries: Alkaline Battery
Battery Life: 20 Hour Typical
Input Voltage: 9 V DC Battery
Temperature:
32°F (0°C) to 104°F (40°C) Operating
-4°F (-20°C) to 140°F (60°C) Storage
Dimensions: 8.73" x 1.88" x 1.26"
Package Contents:
IntelliTone 200 Probe
RJ-11 and RJ-45 patch cables
Lanyard
Owners CD
Quick start guide
9 volt battery
Additional Information: POTS telecom service available
Altitude: 3000 m
Operating Relative Humidity:
95 % (50 °F to...
WARNING: The products listed on this page and in this category may contain chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.