Specifications: User interface
Slide switch selects Continuity or Tone Mode
Push button switch selects SOLID, ALT or OFF
Tone mode LED
Continuity/Polarity LED
Solid Frequency
1000 Hz nominal
Alternating Frequency
1000/1500 Hz nominal
Over Voltage Protection
60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode
8 dbm into 600 ohms
Output Voltage Level in Continuity Mode
8 Vdc with fresh battery
Battery
9V alkaline
Temperature
Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions
2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)
Specifications: Battery Rechargeable: Yes
Battery Chemistry: Nickel-Metal Hydride (NiMH)
Battery Capacity: 3500 mAh
Output Voltage: 7.2 V DC
Maximum Battery Run Time: 16 Hour
Weight (Approximate): 11 oz
Features: Make effortless, uniform connections with Fluke Networks’ D814™, all-in-one, telecom punchdown tool. Its adjustable impact wheel has high and low settings for any type of termination. Automatic spring mechanism provides right impact to seat and/or terminate wires. Compartment at the end of the tool stores an extra blade.
This punchdown tool is available alone or in sets with commonly-used blades. Its lifetime warranty is confirmation of its durability.
Specifications: Test Services:
Detects IntelliTone digital signal and 1 kHz signal from analog toners.
Features a CABLEMAP capability that identifies common cable miswires such as opens, shorts, and reversed pairs in twisted pair cabling.
Ports: 1 x RJ-45 10/100Base-TX Network
Connectivity Media:
Twisted Pair
Coaxial
10/100Base-TX
Status Indicators:
8 LED indicators
1 Synch LED indicator
Batteries: Alkaline Battery
Battery Life: 20 Hour Typical
Input Voltage: 9 V DC Battery
Temperature:
32°F (0°C) to 104°F (40°C) Operating
-4°F (-20°C) to 140°F (60°C) Storage
Dimensions: 8.73" x 1.88" x 1.26"
Package Contents:
IntelliTone 200 Probe
RJ-11 and RJ-45 patch cables
Lanyard
Owners CD
Quick start guide
9 volt battery
Additional Information: POTS telecom service available
Altitude: 3000 m
Operating Relative Humidity:
95 % (50 °F to...
Specifications: Includes Accessories:
MicroScanner2 Cable Verifier
main wiremap adapter
remote identifiers #2-7
IntelliTone Pro 200 probe
shielded twisted-pair RJ45 patch cord
RJ11 patch cord
clip-set RJ45 to 8 alligator clip bare wire adapter
F Coax push on patch cord
accessory soft pouch
(2) AA alkaline batteries
(1) 9V alkaline battery
MicroScanner2 Getting Started Guide
MicroScanner2 Owners CD
IntelliTone Pro Getting Started Guide
MicroScanner2 owners CD
IntelliTone Pro Getting Started Guide
IntelliTone Pro owners CD
packaged in a deluxe Fluke Networks carry case
Features: Oversized Display – Large, backlit LCD makes results crystal clear whether in bright sunshine or in a dark closet
Revolutionary Interface – Graphical wiremap, length, cable ID, and distance to fault displayed on one screen
Multimedia Sup...
WARNING: The products listed on this page and in this category may contain chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.