NeweggBusiness - A great place to buy computers, computer parts, electronics, software, accessories, and DVDs online. With great prices, fast shipping, and top-rated customer service - once you know, you Newegg.
If you are reading this message, Please click this link to reload this page.(Do not use your browser's "Refresh" button). Please email us if you're running the latest version of your browser and you still see this message.
Features: Widely use for power transistor, FET, IC, power amplifier, Voltage Regulator, MOSFET, SCR, 3D Printer A4988 chipset,router chipset, LED light devices,Raspberry Pi,Banan Pi, Orange Pi,etc,reduce the risk of hardware failure due to overheating.
These pure aluminum heat sinks include adhesive thermal tape for efficient thermal transfer to the heat sink providing additional cooling to the IC. Also, it is easy to remove with a razor blade, so you can remove the heatsink without damaging the chips.
Size is 20mm x 14mm x6mm,Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
Product Name: Heatsink
Material: Aluminium
Color: Silver Tone
Overall Size: 20 x 14x 6mm/ 0.8" x 0.55" x 0.24" (L*W*H)
3M 9448A Heat-conductive adhesive...
Specifications: Main chip: NEC UPD720202 chipset
Have unused mini PCIe slot for PC expansion slot a 19-pin USB3.0 theoretical transfer rate up to 5Gbps, much higher than the USB2.0 480Mb / s, up to 10 times;
Backward compatible with USB2.0, USB1.1, USB1.0
Transfer rate: 5Gbps/ 480Mbps/ 12Mbps / 1.5Mbps
Small Molex 4 pin to take power by the board, or you can into a SATA power. (To change, please contact customer service)
Built-in 19-pin can turn out two USB3.0 ports
Compliance with PCI-Express Specification Revision 2.0
Compliance with xHCI specification version 1.0
Compliance with USB3.0 SuperSpeed specification version 1.0
USB support hot swap function
Support Windows XP / 2003 / Vista / win7 / win8 / 2003 / linux, can provide LINUX drivers.
Note:
Mini PCI-E because without a 5V power supply, not directly to the USB-powered, so it can be inserted using the SATA power cab...
Features: ixable board with 4 holes available on PCI-E 16X side to fix PCI-E 16X connector on motherboard for more convenient management for graphics card. Thin and fast USB 3.0 cable available to connect PCI-E 1X and PCI-E 16X sides for more free installation and faster data transfer for graphics card. SATA power connector available for more stable operation for graphics card while mining. Install PCI-E 16X device to PCI-E 1X slot freely according to dimension and position of motherboard and case. One end is PCI-E 16X female and another end is PCI-E 1X male. USB cable length: 60cm,White Black.
Package Contents: 6 x PCI-E 16x Riser Adapter 6 x PCI-E 1x Riser Board 6 x USB3.0 Male to Male cable (60cm/1.96ft) 6 x Sata 15 pin power cable (15cm/0.49ft)